sigintel
Well-Known Member
- Joined
- Nov 24, 2015
- Threads
- 59
- Messages
- 2,040
- Reaction score
- 1,069
- Location
- Republic of Texas, God's Country
- First Name
- Ray
- Vehicle(s)
- 2018 GT
If you remove the hood, You can step up to get both feet where you are standing on the strut towers and then use proper form to do a squat to lower head unit(blower) in place onto the IC/manifold.
The intercooler/manifold and head unit are unbolted from each other and placed on the engine separately instead of as one bolted together assembly. They likely ship bolted together and seem heavy if you try to lift them assembled together.
Before removing hood, I used fresh razor blade to carefully trace around the hood nuts so that the paint would break cleanly when loosening. Wrapped painters tape around nuts before loosening to keep them from getting marked up (going to get made fun of for OCD in 3..2..1..).
The intercooler/manifold and head unit are unbolted from each other and placed on the engine separately instead of as one bolted together assembly. They likely ship bolted together and seem heavy if you try to lift them assembled together.
Before removing hood, I used fresh razor blade to carefully trace around the hood nuts so that the paint would break cleanly when loosening. Wrapped painters tape around nuts before loosening to keep them from getting marked up (going to get made fun of for OCD in 3..2..1..).
Sponsored