i checked mine on my way into office after reading about your post.... its there but only has a "normal" reading. I think your looking for an actual pressure lbs reading... but that its not.hmmmm someone's lying!I've cycled through all available gauge displays and oil pressure is not listed, just oil temp. Now you're making me crazy and I'll check for the 100th time!
I started up that way. The traffic was horrendous because of the air show at Alliance. Couldn't have picked a worse day. Add in the realignment construction on I-35 N at the TX 170 junction ...... Gah !
oh suuuure it has. Photos or it didn't happen.(It's been thoroughly cleaned and detailed since I returned.)
Have posted this before - look real good, but if you wanted to elevate the look a little bit (i.e. get rid of the incandescent and go with LED), I'd recommend the DiodeDynamics set of sidemarkers. I got the smoked one on my Bullitt and it looks really good. Or you could go with clear and re-apply your tint.In the name of keeping the up with the rest of this crowd, i layed out tinted rear markers. Not sure if these will stay as is cuz they didnt cover allll that great imo, But here goes...13 bucks worth of a mod.
I wish somebody made ones that evenly light the entire part. Not just a stripe down the middle.
dude, good looking out! Bullitt looks good! I was looking at the DD LED versions as I do believe these will be upgraded down the road. I had the overlays laying around from amazon and figured to see how they did.... they work temporarily for the blacked out rear.Have posted this before - look real good, but if you wanted to elevate the look a little bit (i.e. get rid of the incandescent and go with LED), I'd recommend the DiodeDynamics set of sidemarkers. I got the smoked one on my Bullitt and it looks really good. Or you could go with clear and re-apply your tint.
Just stay away from the cheaper ones AmericanMuscle has. It burnt up after 6mos and damaged my plug. But the Diode Dynamics have a 3yr warranty:
then it wouldn't be $7. You'd need a diffuser and enough thickness in the assembly to pull it off. I don't know if they make low power version of the surface-mount emitters.
Also I think then you'd be getting into DOT issues as that would be pretty bright... It looks great at night and from distance, too.
yep...was looking for an actual psi gauge display. I saw on some other post that Ford intentionally did not provide it for the 400A cluster. I believe its a dedicated gauge with PP1 and 2 and available to display with 401 digital cluster. I didn't see the normal display. I'll have to look for that tonight. Kept her home today since we're supposed to get a noreaster starting this evening. The way the weather forecast is crap, I didn't want to take a chance driving home in that. Remember that suprise October snowstorm we had a year ago...it was not in the forecast and caught that whole state off guard! Took me 3 hours to go 9 miles home!
Good Call! I might leave early today! BUT....I'm driving it as much as I can till the crap comes down. then its getting covered for winter. I've been there though, caught at work when the state gets blasted. After this week I am working from home indefinitely so well see how it goes.
I'm actually putting it in the garage tonight for first time since the 68 is out....
