Sagittaria
Well-Known Member
- Joined
- Sep 23, 2018
- Threads
- 4
- Messages
- 116
- Reaction score
- 95
- Location
- St. Paul, MN
- Vehicle(s)
- 2018 GT350R
Great guide - I've installed BLIS mirrors and pre-2018 SODL/SODR into my 2018 GT350.
BLIS and CTA confirmed to work.. only thing is — I for the life of me cant get the CTA and BLIS menus to appear under driver assist.
I've verified SODL/SODR configs about 10 times. I don't think it's this as CTA and BLIS lights do work.
I've verified both IPC values to enable BLIS/CTA and flipped them back and forth about 5 times. I've even used the FORSCAN non-AS-BUILT menus to flip them back and forth. Nothing.
Cleared DTCs about 5 times. Everyone says they pop up immediately. No DTCs pop up except for one possible fluke — the IPC received invalid data from both SODL/SODR.
Any ideas? Quite annoying. Last thing I can think of is to try the "reset module" function of forscan.
BLIS and CTA confirmed to work.. only thing is — I for the life of me cant get the CTA and BLIS menus to appear under driver assist.
I've verified SODL/SODR configs about 10 times. I don't think it's this as CTA and BLIS lights do work.
I've verified both IPC values to enable BLIS/CTA and flipped them back and forth about 5 times. I've even used the FORSCAN non-AS-BUILT menus to flip them back and forth. Nothing.
Cleared DTCs about 5 times. Everyone says they pop up immediately. No DTCs pop up except for one possible fluke — the IPC received invalid data from both SODL/SODR.
Any ideas? Quite annoying. Last thing I can think of is to try the "reset module" function of forscan.
Sponsored