What did you do to your GT350 today?

[MNGT350]

Nice and light.... can you guess what they are

SV501 gloss black. Nice. Still need to mount my SV502 matte black this spring

Sponsored

 

[torque124]

So being that my car isn't an R, it originally came with 295/35 and 305/35 front and rear. Currently I'm running 305/30 and 325/30. I'm assuming my speedo has been off while I've been running the 30's and by going back to the 35's (but 305's all around this time) it should be back to normal?

yes, indeed.

 

[Lorne34]

Got my windows tinted and then to the dealer for the reverse lockout repair.

That is gorgeous! really love the tinted windows with the black roof.. the shelby lettering is cool as well. great job..

 

[Lorne34]

No no, not on the rubber seal . That will still rub on the paint if you do that. Line up some tape on the underside of the hood, where the rubber touches the hood.... I discovered it a bit late on my track pack, and it was marked (I did manage to buff it out with some polish and my electric random orbital sander) .

Thanks... sorry I figured that, but wanted to be sure.... didn't realize you could purchase xpel tape, thought it was only available for the professsional PPF installers

 

[torque124]

Thanks... sorry I figured that, but wanted to be sure.... didn't realize you could purchase xpel tape, thought it was only available for the professsional PPF installers

https://www.xpel.com/shop/additional-products/door-edge-guard

I used the 1/2" and the 3/8", I got both now... Used it also on the doors of my other 2 cars, you can never be too careful

 

[Lorne34]

https://www.xpel.com/shop/additional-products/door-edge-guard

I used the 1/2" and the 3/8", I got both now... Used it also on the doors of my other 2 cars, you can never be too careful

THanks!! If you are ever in Wisconsin look me up!

 

[matthewr87]

I changed the oil for the first time and installed the Ford Performance air filter. Race ramps worked nicely for the oil change and I managed to not make a mess when removing the oil filter, which was nice. Also, I noticed that the oil pressure increased with the new 2087 filter vs the 2062 that was installed from the factory on my 2018. Hot throttle is now 100 PSI vs 75 PSI before and hot idle is now 50 PSI instead of 30ish from before.

 

[cobra4ever]

Is this sufficient social distancing? One of the few upsides of all this craziness.

 

[lenFeb]

Is this sufficient social distancing? One of the few upsides of all this craziness.

At first look I thought this is parking garage at my office location. So similar this days.

 

[torque124]

Installed my Signature wheels... couldn't be any happier. I mean I could if it wasn't for this bloody virus.

 

[Biggsy]

Installed my Signature wheels... couldn't be any happier. I mean I could if it wasn't for this bloody virus.

The car looks perfect man. I thought I was done with black cars but you did great

 

[QCGoose]

Installed my Signature wheels... couldn't be any happier. I mean I could if it wasn't for this bloody virus.

Those wheels do look good, and they look similar to the factory GT350 wheels (a plus for me). Do you happen to know the weights of them? I know the factory wheels are heavy as hell, and I'm unsure how long I plan on using the Cup 2's on the street, so a nice set of forged, lightweight wheels with different tires may be a future purchase for me (if the car ever gets built and delivered, thanks to this virus, that is).

 

[torque124]

Those wheels do look good, and they look similar to the factory GT350 wheels (a plus for me). Do you happen to know the weights of them? I know the factory wheels are heavy as hell, and I'm unsure how long I plan on using the Cup 2's on the street, so a nice set of forged, lightweight wheels with different tires may be a future purchase for me (if the car ever gets built and delivered, thanks to this virus, that is).

I measured them when I got them... see my previous post with scale... 21lbs front, 20lbs rear.

 

[QCGoose]

I measured them when I got them... see my previous post with scale... 21lbs front, 20lbs rear.

Ah, my mistake, but thanks for reposting them. And man, those ARE light.

 

[torque124]

Ah, my mistake, but thanks for reposting them. And man, those ARE light.

Indeed, I wanted minimum compromise coming from a 18 lbs carbon wheel... this is as close as it's going to get

Sponsored