madlag
Snake Charmer
- Thread starter
- #1
hey fam, looking for thoughts on an issue I’m seeing. I installed a D1x Procharger on my gt350r in December. No problems, I ran it for 1500 miles and then started experiencing belt slip. I only push 9-10psi so I shouldn’t be having slip issues. I retensioned to spec and even replaced the belt. Still slips. Last week I installed a griptec non slip pulley. This helped tremendously but it will still slip under heavy load.
I noticed my tensioner is noisy and constantly moving at idle. Also the Procharger has a shake/shudder to it if I rest my hand on it at idle. I suspect the spring tensioner is bad. Other possibility is bad bearing in the Procharger headunit heating up and building resistance. I’m using the recommended gates belt.
Thoughts? @ProChargerTECH
I noticed my tensioner is noisy and constantly moving at idle. Also the Procharger has a shake/shudder to it if I rest my hand on it at idle. I suspect the spring tensioner is bad. Other possibility is bad bearing in the Procharger headunit heating up and building resistance. I’m using the recommended gates belt.
Thoughts? @ProChargerTECH
Sponsored