New LMR SVE SP2 Wheels (PP2 Replica)

[LSchicago]

I just took my car on a 230 mile trip today. The tire did great. 2-3 times the off/on ramp speeds felt very comfortable, as did a few quick lane changes, and a quick blast up to 130. Pulling away from the toll booths at full throttle off the stops gave very little wheelspin on my 18 GT/A. Very happy with these SP2 wheels and Nitto Invos so far!

Sponsored

 

[rtg]

Black looks good on your car. The only real choice. Why so much rear camber?

The camber is set at -2.0*. The range for the Ford Track Pack is -0.8* to -2.3*. So in the range for a car lowered 1" but close to the limit.

Guessing the picture angle plus the rock guard angle makes it look more exaggerated than it really is.

Thanks,

Rob

 

[capt218]

Has anyone put the stock super cup 2 off the pp2 on the stagger fit version of these wheels? Any issues?

 

[CEHollier]

Slipped on the drivers side for some quick shots. These are Gloss Black with the Nitto NT05's.

Rob

Black looks good with your color.

 

[rtg]

Any recommendations on coating the wheels before they go on this spring?

Thanks in advance,

Rob

 

[eveslow78]

Any recommendations on coating the wheels before they go on this spring?

Thanks in advance,

Rob

Gtechniq C5 Wheel Armor! It's truly the best!

 

[rtg]

Gtechniq C5 Wheel Armor on the way.....

 

[eveslow78]

Gtechniq C5 Wheel Armor on the way.....

Nice! Remember, prep is as important as the application.

I'm guessing they are new? If so, you can probably get away with using IPA 70% as the last prep step vs using Gtechniq Panel Wipe.

Hit me up with any questions. I am in the Gtechniq accredited network and can help with whatever.

 

[rtg]

They are new.

My thought was to clean with Simple Green then an alcohol wash. The solution used to mount the tires is everywhere....

Given its cold and the outdoor water is off, trying to avoid a full wheel bath.

BTW, I got 2-15ml bottles. Autogeeks did not have the 30ml bottle. Should that be enough for the four wheels?

Thanks,

Rob

 

[Bubba Bear]

Does anyone know if they're planning on offering these in satin or matte black next year? Really like the look but can't do gloss wheels. They offer their other reps in matte shades so I'm hoping it's a yes, but I didn't get any reply when I emailed them :/

 

[dmann]

Slipped on the drivers side for some quick shots. These are Gloss Black with the Nitto NT05's.

Did you get the 19x10 square package? If so, How did you get the NT05s with it? Are the NT05s comparable to Toyos R888r?

 

[rtg]

This is the package I got....

https://lmr.com/item/WTK-188912NA/sve-mustang-sp2-wheel-tire-kit-19x10-11-black-nt05-15-19

Rob

 

[dmann]

This is the package I got....

https://lmr.com/item/WTK-188912NA/sve-mustang-sp2-wheel-tire-kit-19x10-11-black-nt05-15-19

Rob

ohhh, ok.
I am wanting square. Do you know if they allow the packages to be mixed?

 

[rtg]

They do....

https://lmr.com/item/WTK-188902HA/sve-mustang-sp2-wheel-tire-kit-19x10-black-ohtsu-15-19

and this one...

https://lmr.com/item/WTK-188902GA/sve-mustang-sp2-wheel-tire-kit-19x10-black-g2-15-19

Rob

 

[madsedan]

Anyone thrown the 19x10 on a scale to confirm weights?

Sponsored