Dreaded over asked offset question 19x9.75 15 ET

[msweet]

Whatever you go with, make sure you post it up! Love seeing all the different setups

Sponsored

 

[i4gains]

Fair enough. imo +15 offset is way too low

This is me on 20x9.5+30 with a 275/35 (front). With -2.2 camber the top tucks, but you have camber plates so you can play with the camber settings to get the desired look.

I'm not sure exactly how low I am, but even with +30 offset it rubs being this low. I do often drive hard though

+15 offset will sit more than 1/2" further out, will poke for sure

This is a VERY nice looking set up, just how i like it. Ive decided on the 19x10.75 +35mm squared. Once my 275 tires are worn, ill be getting some 285s

 

[msweet]

Thanks mate!

Nice, that should fit awesome, looking forward to seeing it

 

[BmacIL]

This is a VERY nice looking set up, just how i like it. Ive decided on the 19x10.75 +35mm squared. Once my 275 tires are worn, ill be getting some 285s

You may need a 5 mm spacer to clear the front struts. Just an FYI.

 

[i4gains]

You may need a 5 mm spacer to clear the front struts. Just an FYI.

Thanks so much! once i get a bigger tire, ill get them. How should my alignment be? Any camber

 

[BmacIL]

Thanks so much! once i get a bigger tire, ill get them. How should my alignment be? Any camber

You want camber for proper handling anyway. -1.5 front, -1.3 rear.

You may have wheel to strut clearance problems with +38, not tire. 5 mm spacers will be easy to sell if I'm wrong, but I don't think so. +40 on a 10" wheel barely clears, for reference.

 

[i4gains]

You want camber for proper handling anyway. -1.5 front, -1.3 rear.

You may have wheel to strut clearance problems with +38, not tire. 5 mm spacers will be easy to sell if I'm wrong, but I don't think so. +40 on a 10" wheel barely clears, for reference.

i believe i have like hub centric spacers, 1.5 in spacer and i believe a 1 in ch spacer too, would one of those work?

 

[BmacIL]

i believe i have like hub centric spacers, 1.5 in spacer and i believe a 1 in ch spacer too, would one of those work?

Too much. Get some 5 mm ones.

 

[NightParade]

He might need a pic of your setup to determine whether there is poke. Subjectivity and all that.

I think your setup is dope btw, but too aggressive for me in the front. How badly does it rub?

Heres mine with 10.5 +25 up front just for reference, It doesn't rub at all.

So 10.75 +35 should be just fine especially with 275 and having the camber plates on coilovers also so you can dial it in a bit more negative. BmacIL is right might need small 5mm so clear inside, just have to wait and see. Look forward to pics bro, goodluck!

 

[msweet]

Heres mine with 10.5 +25 up front just for reference, It doesn't rub at all.

I guess you're running pretty much same specs as PP2 wheel in the front. Higher ride height probably helps.

Good to know though, planning a 10.5 up front on the next car. Not gonna be nearly as low as this car

 

[i4gains]

Too much. Get some 5 mm ones.

Yeah thats way too much, 1 inch is way more than 5 mm lol.

Last little curve ball, as i was gonna buy them i did some browsing around and found a 19x10 in either a +40mm or +20mm. this would fit my tires a bit better, and they are a bit less than the others. what do you guys think would make the most sense fitment wise? Im really sorry for asking so many questions, but im very grateful you all have been such helpful resources.

 

[BmacIL]

19x10 and +40 would work great.

 

[djcodeman]

Anyone got a pic of a 20x9 + 15 up front?

Sponsored