[?] '18 Intake Manifold on '15-'17

[EODTech87]

Just to confirm, you're running the '18 IM with the IMRCs locked out, correct?

No, I'm running the '18 IM with the IMRC fully functional.

Sponsored

 

[DarkestHour]

No, I'm running the '18 IM with the IMRC fully functional.

Mine are locked out btw

 

[sstone]

Okay, I was running locked out and now I’m running my IMRCs.

With the IMRCs—pigtails courtesy of EODtech, then the oem blue plug in. My other blue plug is dangling, sealed up right now.

Runs fine, tripped a p2008 today after running for 2 hours. Log in to Lund to take a look.

 

[16s550]

Okay, I was running locked out and now I’m running my IMRCs.

With the IMRCs—pigtails courtesy of EODtech, then the oem blue plug in. My other blue plug is dangling, sealed up right now.

Runs fine, tripped a p2008 today after running for 2 hours. Log in to Lund to take a look.

Keep us posted. Ill probably have same issue.

 

[EODTech87]

Okay, I was running locked out and now I’m running my IMRCs.

With the IMRCs—pigtails courtesy of EODtech, then the oem blue plug in. My other blue plug is dangling, sealed up right now.

Runs fine, tripped a p2008 today after running for 2 hours. Log in to Lund to take a look.

If they can’t disable p2008 ask them to disable p2011 and swap the blue plugs and that should fix it.

 

[wagnor]

Currently running the PnP harness and I’m throwing DTCs p2004 and p2008 tune confirmed the correct voltage is set. I have one blue plug connect and the other disconnected. Anything else I should check? Currently waiting on datalog review for any corrections needed.

 

[EODTech87]

P2008 should be from the disconnected blue plug. Switch the 2 and see if anything changes. Switch the 2 pnp adapters to see if the p2004 stays on bank 1 or switches to bank 2

 

[Umang]

So I just got my car off the dyno, and they received the code P2005. Anyone have a clue to what that's about?

 

[EODTech87]

Did your tuner change the voltage for the sensors on the tune?

 

[SNOOPY]

Are all these codes from people using the IMRC still? Or mixed between using and not using? :(

 

[Umang]

I used the pigtails and did the wiring, and got the code P2005. Not too sure what it would be from the IM though. Any help?

 

[Umang]

Did your tuner change the voltage for the sensors on the tune?

Im not too sure, I'll ask him though.

 

[GrabberS55017]

I used the pigtails and did the wiring, and got the code P2005. Not too sure what it would be from the IM though. Any help?

I'm having the same issue, my tuner can seem to figure it out and said he has tuned hundreds of these manifolds and said it's my wiring but mine is the same as everyone else so not sure I'm about to give up and go locked out.

 

[GrabberS55017]

Did your tuner change the voltage for the sensors on the tune?

So I talked to Lund and they told me that the voltages has nothing to do with it and assured me it's my wiring.

 

[Umang]

I'm having the same issue, my tuner can seem to figure it out and said he has tuned hundreds of these manifolds and said it's my wiring but mine is the same as everyone else so not sure I'm about to give up and go locked out.

Hmm interesting, yeah idk! Im hoping someone here can help on the forums. Hopefully they know what the issue is. He deleted the code for now though.

Sponsored