Cleaning Tailpipes

[MrCincinnati]

What do you all use to clean the chrome(ish?) tail pipe pieces?

Sponsored

 

[Muligan]

Small dab of Simichrome polish on a microfiber, followed by a swipe with a very well seasoned chamois.

 

[johnny1]

I just wipe mine with a wet absorber each time after driving it. But I assume any of those automotive chrome polishes would work.

 

[Zombo]

They are CRES (Corrosion Resistant Steel, AKA Stainless Steel).

 

[scannon]

I use Meguiars Final Detail on a microfiber towel each time I clean the car.

 

[rb92gt]

Bar Keepers Friend on a wet paper towel I simply through away when cleaned, which takes about 10 seconds.

 

[TDC]

Meguiars Mag and Aluminum polish paste.

 

[MrCincinnati]

Thanks for the replies. Going to try a few of the above and see what works best for me. I’ve been just wiping them with an old wash rag but they stay somewhat blackish on the inside rim. I see pictures on here and guys have shining tips. I’m like wtf

 

[fpa1974]

Meguiars Mag and Aluminum polish paste.

That stuff is really good. This is what I use too. In between polishing them I use RejeX to protect.

 

[GT_Dave]

If it is really tough dirt, even if it is not, white Scotchbrite (won't scratch chrome) and Wenol metal polish.
Nothing cleans better than this combo.
And the tail pipe tips are polished stainless steel.

 

[btown93]

Obsessed garage on YouTube used p21s on his GT350 exhaust tips. If it’s good enough for him it works for me!

 

[N123456]

Meguiars Mag and Aluminum polish paste.

Also use this. Stuff works wonders. Used it to polish the headers on my motorcycle and they looked brand new after. I’ve used it ever since.

 

[xXANCHORMONXx]

Brasso

 

[Tank]

All of the above are good... I use this based on recommendation through this forum. Works for me.

 

[JohnBoyNC]

Mother's Aluminum polish works well, as well.

Sponsored