727HP Roush Phase 2 Supercharger Question?

[Mustang_Lou]

Seriously considering doing this next, paid off the car today so its time to turn it up

You and me both! Livernois has installed kits (Ford Performance not Roush mind you but same thing) for $8k and change as I recall.

Sponsored

 

[hmperf]

You and me both! Livernois has installed kits (Ford Performance not Roush mind you but same thing) for $8k and change as I recall.

The Phase 1 is the same as the FP one, but FP doesnt offer the P2 option.

 

[Mustang_Lou]

The Phase 1 is the same as the FP one, but FP doesnt offer the P2 option.

Looks like they take it to the Stage 2 level themselves.

https://www.livernoismotorsports.com/product/LPP0114727

 

[hmperf]

The Roush P1 is exactly the same as the FP version. However you absolutely can just get the Roush P1 to P2 upgrade and it works just fine on the FP SC. In other words if you want to go with the P2 power you dont need to start with a P1 SC from Roush, you can start with the FP SC.

 

[HISSMAN]

I have Nitto's and 1st and 2nd are still useless. I have 305's back there. I have the 3.73's and the updated Roush Tune. The latest tune isnt so bad but I still think it could be better.

I have no doubt. I have 305 Nitto NT05's and My first and second are useless with no power adder.

 

[spogshd]

I'm phase one with a lund tune at the moment, I'm about to take it to phase two. I will be doing the timing gear and opg, so that's tensioners, chain guides, cg, secondary tensioners. I was thinking after these have been fitted what sort of rpm could I take it to, I was thinking round 8500 with 95 injectors. I've done no other work to the engine just the above.

 

[cdq85]

I may be dumb but I don't know if revving out to 8500 is a good idea on a stock motor even with the pump gears. That's gt350 territory lol

 

[spogshd]

I may be dumb but I don't know if revving out to 8500 is a good idea on a stock motor even with the pump gears. That's gt350 territory lol

Suppose what I meant to say was where would the tuner set the rpm I was guessing at 8500, seams that's to high then. where should I be asking them to set it. Where does power peak out with a custom tune on the phase two.

Sponsored