Waldo2536
Well-Known Member
Ok cool also I'm having trouble on putting what connector goes where. I know they're plug and play according to size but some are similar and I don't want to mess up. Can anyone help
Sponsored
They will literally only fit one way.Ok cool also I'm having trouble on putting what connector goes where. I know they're plug and play according to size but some are similar and I don't want to mess up. Can anyone help
The yellow RCA that is attached to the latching harness connects to the yelow RCA marked REAR (or back)How do all the red white and yellow cables all go?
That's why I was lost lol another question what about all the single cables? Like the 2 green and 2 white onesThe yellow RCA that is attached to the latching harness connects to the yelow RCA marked REAR (or back)
The other RCAs aren't used unless you have another camera to connect.
If yours already says 5.1.1 you won't need it. You'll have to go to settings, click MPH.Looks like the firmware update from Stangs site didn't work for my unit.
I put the .img file on a flash drive, unit picked it up automatically and ran the system update process. After reboot it looks the same as before. Bluetooth still shows "Dail" and km/h.
I'm trying the update again from the front USB port this time. It's been installing for a while now.
This unit shipped with 5.1.1 OS
If they're the single wires, with no connector, they're unused.That's why I was lost lol another question what about all the single cables? Like the 2 green and 2 white ones
Can you pm your number so I can send you pictures? I only need two more connections and almost doneIf yours already says 5.1.1 you won't need it. You'll have to go to settings, click MPH.
The Dail fix is different.
Don't interrupt it if it's running.
If they're the single wires, with no connector, they're unused.
Sounds like you didn't hook it up in the right spot.soo I hooked in up and verything seems to work, except the back-up camera.
took it all apart and made sure the yellow RCA was hooked up and it is.
any suggestions?
The yellow RCA cable has to be comnected to the other yellow one marked CAMERAit seems to only have one spot on the brain box? or am I missing something
My HVAC temp was already in Fahrenheit.TIME FOR A UPDATE!!!!! (Well kinda)
So [MENTION=20219]StangATX[/MENTION] and I were messing around with the unit today and found a way to change the HVAC temp from Celsius to Fahrenheit (we are in MURICA after all right?)
So here is how it's done
You'll need nova launcher (free from play store)
Open nova launcher and open the app drawer (little circle in lower middle of screen with dots in it)
You should see an app called factory set with a gear icon
Open it and you should see the bottom screen pop up
Click on factory set
Scroll down till you see temp unit set and click on fahrenheit
Turn the car off and open the door
Enjoy American temp and not commie temp