Steeda's S550 Billet Rear Shock Mounts Are Finally Here!

[DarkHorse5.0]

Thanks TJ, that's good to know. I've had those 1 time use bolts in and out probably 5 times now.

Cool that makes me a lot less worried. Mine have been removed and reinstalled twice now

Sponsored

 

[jc1804]

will that be a new part or a mod to the one that is available now? want to make sure to get the correct one.

thanks

 

[SteedaTech]

will that be a new part or a mod to the one that is available now? want to make sure to get the correct one.

thanks

Same part number just a running change. Will be available next week.

Mike D

 

[MaverickGT]

Now that I installed the mounts I have a question. How do you torque the bolt? I got it as tight as I could. It has a 21mm head that sits into the recess at the top of the mount and there's not a lot of room to get a wrench on it. Is there a special tool that allows you to hold the shock shaft and tighten the bolt? I only have access to sockets and wrenches.

 

[Tcstang]

Now that I installed the mounts I have a question. How do you torque the bolt? I got it as tight as I could. It has a 21mm head that sits into the recess at the top of the mount and there's not a lot of room to get a wrench on it. Is there a special tool that allows you to hold the shock shaft and tighten the bolt? I only have access to sockets and wrenches.

Just ordered mine today would like to know this as well.

 

[plc268]

I dunno if it's different on the billet mounts, but I torqued mine with a crowfoot on a torque wrench and used another wrench to hold the shaft still.

 

[MaverickGT]

The crowfoot makes sense. The problem I see is there is only 1-2 mm of area on the nut to get a wrench onto. I used a socket to get it that far.

 

[Jeff_oddo]

Guys... Invest in one of these and be done with it.

 

[MaverickGT]

Guys... Invest in one of these and be done with it.

That's perfect. What do you call it? Can't read the name. I did a search for cr-v 21mm and didn't find this.

 

[Jeff_oddo]

https://www.ecstuning.com/b-schwabe...T_12XrzGo7d5FoIYTYt_tLHKQDCVpoHkX3hoCcn7w_wcB

 

[MaverickGT]

Ordered one, thanks.

 

[D3adch1ld]

Same part number just a running change. Will be available next week.

Mike D

Of course, i jumped to it and ordered mine right-a-way. How can I go about replacing them? Havent installed them yet.

 

[tj@steeda]

Of course, i jumped to it and ordered mine right-a-way. How can I go about replacing them? Havent installed them yet.

Let me look into this for you.

Best Regards,

TJ

 

[boardkat]

Same part number just a running change. Will be available next week.

Mike D

if i place an order today, will i be assured of getting the revised part with more clearance? also, any pics to share?

 

[jc1804]

if i place an order today, will i be assured of getting the revised part with more clearance? also, any pics to share?

was thinking the same thing

Sponsored