Konik / Philips LEDs

[Drewbo]

So Drewbo....how much and where from and any hints as to how to install. Which bulbs do these replace?

It's all here Peter - apart from the install hints.

http://www.ebay.com.au/itm/PHILIPS-...979816?hash=item1c6229a1a8:g:-noAAOSwB4NWz~Eb

Replaces the factory fogs/DRL's/parking/reverse and interior lighting.

Hopefully a video tutorial will appear sometime soon on the Tube.

:shrug:

Sponsored

 

[MM Pony GT]

So Drewbo....how much and where from and any hints as to how to install. Which bulbs do these replace?

For installation, refer to owners manual (replacing lightbulbs) and also check out CJ Pony Parts YouTube video. Diode Dynamics also have install guide videos.
Nothing complex, but can be tricky / difficult due to tight fit and odd positioning.
I needed a few attempts, but got there in the end.

 

[POJ 1]

have any of you investigated the switchback led bulbs which flash yellow when indicating a turn but burn white the rest of the time, as marketed by Diode dynamics, CJ's and raxiom ?
Thks

 

[yellowpony]

have any of you investigated the switchback led bulbs which flash yellow when indicating a turn but burn white the rest of the time, as marketed by Diode dynamics, CJ's and raxiom ?
Thks

Here it is check this out

http://www.ebay.it/itm/Dual-Color-A...-Resistor-/271603385411?var&hash=item0&_uhb=1

 

[yellowpony]

To replace fog globe with LED one.

There are two ways to do it first one is to leave the Fog housing on the car and trying match the notches its a bit of a pain in the neck because you have to fit the globe strait in for its to sit nice and tight in the hosing.


Other option is to take 3 7mm bolts out from the fog housing and fit the new globes in. Removing the housing completely makes it much easier and you can see which hole :eyebulge: you are trying to fit the globe in. Just pretend you are trying to take that old fog housing out and replacing it with the yanky style led one. Again same principal twist it counter clock wise to undo it from the housing and clock wise to lock it in plce

With side marker light, have a long nose pliers handy because you need those to be able to pull that old globe out with the connector from the car. All you have to do is to Grab the connector with the pliers and push a little bit and twist counter close wise (Left) at the same time to be able to release the connector from the parker housing have a look at the pic for clarification.

 

[IngoStang]

Just got an email from Dave today re: my order. Been waiting a little while for a new shipment of globes to come in.

Ordered all the LED replacements as well as the indicators. Much to my surprise, they have upgraded my order with a new design. Some of the email below

" We would like to inform you that we have actually upgraded the H8/H16 LED Fog unit with newer LED chips and made changes in design for easier fitment.

Initially we were going to introduce the new FOG unit in mid May but we are happy to give a free upgrade to the FOG unit for you as you have been waiting for the item for a while. "

Certainly cant complain about that, but no idea what the difference in design is

 

[IngotGT2016]

Just got an email from Dave today re: my order. Been waiting a little while for a new shipment of globes to come in.

Ordered all the LED replacements as well as the indicators. Much to my surprise, they have upgraded my order with a new design. Some of the email below

" We would like to inform you that we have actually upgraded the H8/H16 LED Fog unit with newer LED chips and made changes in design for easier fitment.

Initially we were going to introduce the new FOG unit in mid May but we are happy to give a free upgrade to the FOG unit for you as you have been waiting for the item for a while. "

Certainly cant complain about that, but no idea what the difference in design is

haha me as well just came on to post..
What a good news email for once, now i just need my car.
will put in the corner of my office with all the other stuff.

 

[OzStangFan]

Blingwork has a new package available now, that DIB Mustang looks stunning :love::love:

http://www.blingworkauto.com.au/pro...icator-t10-interior-for-my15-ford-mustang-gt/

I just had the led lights done at BlingWorks as well. Definitely a big improvement. The lights look much better and it works well with the Anchor Room tints I installed.

Also spoke to them re the fix to the headlight DRLs - they are looking at it (with Mustang Motorsport) but they're not sure when / if they'll be able to provide a solution (they have had lots of inquiries about this from mustang owners so hopefully they'll come up with a solution).

Lastly they also mentioned they're looking at an update to the headlight bulb that will bring the cool white colour that the rest of the lights now have - this should be around June this year.

 

[ShadowMustang]

Thank you to OzStangFan for the info concerning the headlight DRLs as operating on the US 2016 Mustangs models. I would be most interested in the mod for the DRL in the headlight rather than the lower fog light. I will check with BlingWorks in a few weeks to see if a mod solution has been developed for the Oz Mustang. I have self installed the BlingWorks LED Package, but have had trouble installing the LED Parker . Just can't seem to remove the old bulbs and am fearful of causing damage if I go at it hard.

 

[IngotGT2016]

I just had the led lights done at BlingWorks as well. Definitely a big improvement. The lights look much better and it works well with the Anchor Room tints I installed.

Also spoke to them re the fix to the headlight DRLs - they are looking at it (with Mustang Motorsport) but they're not sure when / if they'll be able to provide a solution (they have had lots of inquiries about this from mustang owners so hopefully they'll come up with a solution).

Lastly they also mentioned they're looking at an update to the headlight bulb that will bring the cool white colour that the rest of the lights now have - this should be around June this year.

hi any chance of you posting some pics of your your anchor room tinted lenses?
would appreciate a look, i have the LED bulbs and tint pack to install and love to see how it looks with the LED lights on bit worried about the colour / brightness etc :eyebulge:

 

[nchow]

hey guys got the blingworks package. anyone in sydney installed these and can help with install?

 

[SPRTAN]

hey guys got the blingworks package. anyone in sydney installed these and can help with install?

I installed mine the weekend that just passed.
Pretty simple to do. As reported earlier the only pain are the park lights.

Use a pair of pliers to get to them and you'll be sweet.

 

[Since-64]

Drove out to Blingworks yesterday and had the package that includes the blinkers fitted. Makes a huge difference to the look of the car. Very happy with the conversion and must give a big shoutout to the guys at Blingworks.

 

[POJ 1]

Just picked my car up from having the Blingworks front bulbs done
The foglights look great during the day now and the reversing light is so strong I won't have to worry about backing into anything any more, the new light is so strong it will melt anything that I get close to.

Thoroughly recommend the upgrade
Best wishes

 

[OzStangFan]

hi any chance of you posting some pics of your your anchor room tinted lenses?
would appreciate a look, i have the LED bulbs and tint pack to install and love to see how it looks with the LED lights on bit worried about the colour / brightness etc :eyebulge:

Here's the link to the photos

Sponsored