Gt350 intake and centri supercharger

[cp5899]

Does anyone have this setup? I'm ordering a gt350 intake and plan on a Paxton or procharger setup. Just curious if anyone is working on this setup or have any info on how the higher flowing intakes (cj, boss, gt350) work when boost is added. I'm sure there isn't any loss, but curious if much was gained.

Thanks in advance.

Sponsored

 

[HTX_5.0]

I am curious myself. I plan to do the high output procharger kit from beefcake

 

[Higgs Boson]

more power with less boost but whether it's worth it over a simply pulley swap is questionable.....IMO, not worth it if you are going FI.

 

[Jeffy_2010]

I think this combo would net you very solid gains, I'm sure [MENTION=10926]beefcake[/MENTION] could tell us more since he is the centri guy

 

[BadGTR]

more power with less boost but whether it's worth it over a simply pulley swap is questionable.....IMO, not worth it if you are going FI.

Sounds about right. That is why you do both. Add the intake and smaller pulley to bring the boost back up to where you were at and net some huge power gains.

 

[Higgs Boson]

Sounds about right. That is why you do both. Add the intake and smaller pulley to bring the boost back up to where you were at and net some huge power gains.

That really only applies when you get to the smallest pulley. As long as you aren't popping hoses and getting boost leaks, the easiest/cheapest way to add power is to add boost....

 

[BadGTR]

That really only applies when you get to the smallest pulley. As long as you aren't popping hoses and getting boost leaks, the easiest/cheapest way to add power is to add boost....

Oh yeah, going to a smaller pulley is less then $100 buck's. That's a no brainer. Some of us are already spinning the blowers pretty hard and this would be a viable upgrade. I am on a 6 rib setup at the moment and the next pulley smaller would push the limits of the 6 rib. Also if you do a smaller pulley with the intake, I bet there is 80-100rwp to be gained.

 

[whatsup62]

Planning on a simular set-up. I have the Procharger sitting in my living room waiting to go on. I might go with the GT350 intake and TB. I really want to go the Edelbrock Victor ll route...I love the looks. Thats what im waiting for. If Edelbrock does not release it soon I will probably go with the 350 intake.

 

[cp5899]

I keep hearing about the victor intake but haven't seen it yet

 

[jared89]

For half the price, i have been thinking about picking up a boss intake. Some turbo guy made solid gains with it 45+hp.

 

[beefcake]

we are running the boss, not sure how much if any a gt350 will do over a boss on a fi setup

stock throttle body were running low 8s' on our 2011 car...

 

[Inigo]

we are running the boss, not sure how much if any a gt350 will do over a boss on a fi setup

stock throttle body were running low 8s' on our 2011 car...

Hey Beefcake, If I want to run a Boss intake mani with my paxton setup, can you guys source me the parts?

Would I pick up anything extra moving over from the 15s stocker?

Sponsored