Will I need camber plates or bolts?

[Canti]

TJ, do you have a forum code that I could use? I had pretty much decided to with the Steeda camber plates, roll center & bumpsteer correction kit, and rear billet rear shock mount.

Sponsored

 

[Bear380spin]

Hello I am getting a setup of sve r357 with eibach red sport lowering springs (1.5 drop). Should I get camber bolts or camber plates? It would be a huge help.
Front 19 x 10 285/35r/19. +35mm offset
Rear 19 x 11 305/35r/19. +50mm offset

 

[NightmareMoon]

Hello I am getting a setup of sve r357 with eibach red sport lowering springs (1.5 drop). Should I get camber bolts or camber plates? It would be a huge help.
Front 19 x 10 285/35r/19. +35mm offset
Rear 19 x 11 305/35r/19. +50mm offset

What are your goals or concerns?

 

[Bear380spin]

My goal is to be lowered a bit and my concern is that I won’t be in proper alignment. Will camber bolts be enough to get me back in proper alignment but I am thinking of getting camber plates to be safe.

 

[5speed]

I needed the bolts up front but in the rear I had to add these BMR rear camber links
https://www.bmrsuspension.com/?page=products&productid=1936&superpro=0
This was to get in in spec in the rear with the Steeda progressive springs.

 

[tj@steeda]

Jonathan,

Not blowing smoke but if you have the budget ... it is best to compliment the springs with the camber plates. If the bolts don't work ... you will be back at square one.

We put the camber plates on 99% of the cars we lower here at Steeda - peace of mind that you will get it in spec & save on tires down the road.

Keep an eye out - historically, we have always had a 4th of July Sale ... there may be some savings coming up.

TJ

Sponsored