Wheel Fitment

[Classicnige]

So im looking at buying rims and the guys said a 19x9.5 with a 25 offset in the front and a 19x10.5 with a 45 offset will fit does having a 25 offset in the front seem a little weird?i was think of maybe a 33-35 but i could be wrong anyone have any experience with having a 25 offset?im wanting 285 int the front and 305 in the back!

Sponsored

 

[Jackson1320]

i have 20x10 in front with 40mm offset
and 20x10.5 rear 45mm offset with 305 35 20 front 315 35 20 rear. no spacers

 

[Arknsawchuck]

Being its a 9.5" wide wheel +22 shouldn't be that bad. My PP2 came factory with 10.5" +24 up front and 11" +48 in the back. My track front wheels are 10" with +35.

 

[Discount Tire]

9.5 with +22 offset is a touch aggressive. The front lip of the wheel is probably going to sit outside of the fender by just over 1/4"

 

[Classicnige]

9.5 with +22 offset is a touch aggressive. The front lip of the wheel is probably going to sit outside of the fender by just over 1/4"

sorry i missed typed i meant 25 offset

 

[RacingRoger]

Can someone explain the range of offsets for 19X9, 9.5, 10, and 10.5 in wide wheels? For instance, my notes tell me a 19X9.5 wheel with 53mm offset works with the front. OP states a 25mm offset will work on the front.
Is there a chart out there with a range of offsets that will work on the front without spacers, yet not rub on anything and can be aligned without having to do Camber plates?

 

[Discount Tire]

sorry i missed typed i meant 25 offset

The front lip will be nearly flush then, will likely poke by 1/16".

Can someone explain the range of offsets for 19X9, 9.5, 10, and 10.5 in wide wheels? For instance, my notes tell me a 19X9.5 wheel with 53mm offset works with the front. OP states a 25mm offset will work on the front.
Is there a chart out there with a range of offsets that will work on the front without spacers, yet not rub on anything and can be aligned without having to do Camber plates?

Really depends the suspension and desired tire size, but the general consensus is that you can run a 9.5-inch wide wheel on the front with an offset between +25 to +40mm.

Sponsored