What did you do to your S550 Mustang today?!

[Polski]

Dude you wanted “data” LMAO.. I gave you what u wanted then u say it’s hard to believe??.. lol because it’s my car!! You acting like you went out and tested it. But please do. You will notice the same thing I did!!

You really mad for a Sunday night. Want to talk about the fact that someone said that they don't believe/agree with you and you got upset? You must be a blast to live with

BTW - it is a lot of MPG drop, but I couldn't care less. Still will have my flap on and send it

Sponsored

 

[19VelocityBlueGt]

You really mad for a Sunday night. Want to talk about the fact that someone said that they don't believe/agree with you and you got upset? You must be a blast to live with

BTW - it is a lot of MPG drop, but I couldn't care less. Still will have my flap on and send it

Good for you!! But I tested it. I could careless what you believe to be completely honest.. I’m done wasting my time on you. I have other more important ppl in my life to spend my time on. Not arguing with some troll on here!! Have a nice evening!!

 

[Polski]

Good for you!! But I tested it. I could careless what you believe to be completely honest.. I’m done wasting my time on you. I have other more important ppl in my life to spend my time on. Not arguing with some troll on here!! Have a nice evening!!

Damn, you really need to get that checked, it might be too long of a stick Try a size smaller

 

[Bulutt]

Winter now so it’s cold and wet. Best to rug up and stay inside.

 

[2morrow]

We’ll not my car but helped my bro remove and install a stage 2 Ben Calimer MT-82.

Unfortunately one of the slave cylinder bolts broke from a previous clutch install so we couldn’t complete the install today. I backed out the bolt only to find half of it there. Total bummer.

 

[MyStang]

Converting Fog lamps to running lights/turn signals. This is just a rough setup to get some feedback before actually doing it.

 

[Nodster]

Took her out today and filled up with VPower ready for a trip out tomorrow to get her on the dyno. 181.9p a litre. But it's OK, Chancellor Rishi Sunak cut 5p off fuel duty 2 months ago. I'm sure it's working its way through to the pumps right now. Anyyyyy day now.... maybes...

Will pop the power run on tomorrow!

 

[Biggsy]

Stopped procrastinating and used this 4 day weekend to swap out my MM camber plates for MMR camber plates. Alignment this week. Track day in 4 weeks.

(By the way…MM plates listed in classified)

 

[raptor17GT]

Took her out today and filled up with VPower ready for a trip out tomorrow to get her on the dyno. 181.9p a litre. But it's OK, Chancellor Rishi Sunak cut 5p off fuel duty 2 months ago. I'm sure it's working its way through to the pumps right now. Anyyyyy day now.... maybes...

Will pop the power run on tomorrow!

i filled up the other day, 97 supermarket juice and yeah was thinking - what cut? Heading to Highlands in 2wks, thats gonna hurt a lot! Better get decent weather to enjoy the drive

 

[Nodster]

i filled up the other day, 97 supermarket juice and yeah was thinking - what cut? Heading to Highlands in 2wks, thats gonna hurt a lot! Better get decent weather to enjoy the drive

I know right, it's a joke. Hope the weather is decent for you. Have a safe trip!

 

[Roy_Steeda]

Hung out with some great car buddies this Memorial Day

 

[ti-dé]

received my spare wheel set after 4 weeks of waiting.remove the small compressor and install the wheel in the suitcase after trying it under the car

 

[Turning Blue]

I spent some time with my loved ones. Installed Rock Blokz on the Mustang. Spent some time with the wife too...lol.

 

[ice445]

received my spare wheel set after 4 weeks of waiting.remove the small compressor and install the wheel in the suitcase after trying it under the car

Nice, good to add this back. I have a 2020 Explorer spare. It doesn't clear the front brakes, but it's 27 inch diameter so it works better on the back axle.

 

[Nodster]

Dyno run today. Can't tell if I'm dissappointed or not. Power figures and AFR graphs below. Guy said fueling and stuff was spot on. She made 435bhp (441PS) at the fly which was 356bhp (360PS) at the rear wheels. That to me reads almost as stock figures for bhp but the steeda tune and intake says up to an addtional 30 horse power at the wheels. I don't seem to be seeing those gains? Or are these figures I'm seeing about right? Also running 99RON fuel. There also seems to be a small dip in torque between 2700-3300 rpm but it looks like it made about 415lbft (562nm) which is above book figure.

Sponsored