What did you do to your Mach 1 today

[Xpdwheel]

None

Thank you

Sponsored

 

[TrackMeisterWannabe]

UPR billet shifter for the 10r80. Going to be putting it in tonight. What do you all think of the look?

Would be perfect if it had a red "Fire!" button to clear the "left lane loafers" from your path.

 

[Clint81]

Swapped to the GT500 Center gauges and replaced the water they call trans fluid last night to redline D4. Shifts WAY better IMO and got rid of the slight gear "nibble" I had when cold going into 5th.

I am also not thrilled with the factory fill and have been thinking about redline MT85 (75W85) since that matches Tremec's new MTF that they broadly recommend. But I realize the D4 more closely matches Ford's Dextron III ATF specification for us MT folks. Would love to hear more about the D4 as you continue to use it. I've got a 3rd gear nibble that's almost unforgivable.

Edit: I also did the GT500 gauges, I highly recommend it, my favorite mod so far!

 

[joepro]

The d4 shifts great, I cannot reccomend it enough, but thats not to say MTL will not work, maybe even better,honestly, I think anything thicker the tremec will like better. I went with ATF solely if i run into a warranty issue they are not going to know the difference, mtl will be noticeable.

I cannot suggest highly enough anyone with a tremec to get that water our of your gearbox. It smooth as glass shifting now, I was a little disappointed with the tremec after all the hype, it felt a little clunky to me, but the last tremec I had was a fully build t56 by Rick Kim on my corvette, so I assumed it was just because of what I was comparing to...I was considering the mgw but I'm really happy with the results.

I am also not thrilled with the factory fill and have been thinking about redline MT85 (75W85) since that matches Tremec's new MTF that they broadly recommend. But I realize the D4 more closely matches Ford's Dextron III ATF specification for us MT folks. Would love to hear more about the D4 as you continue to use it. I've got a 3rd gear nibble that's almost unforgivable.

Edit: I also did the GT500 gauges, I highly recommend it, my favorite mod so far!

 

[traxiii]

Changed oil/filter @ 3500 mi. using Valvoline full syn with Ford specs.

Installed Ford Performance X-Pipe. Sounds amazing!!! Only notice the difference on acceleration, deceleration and start up, she has an awesome growl now, Love it! Just as quiet as before on cruise, love that too.

I prefer it to the H-pipe's deeper roar.

 

[KrucaBomba]

I have just received a custom steering wheel from HD-Customs. Feels and looks premium:

I think I know how I will spend this evening...

 

[cerbomark]

Questions on some of these mods.
Where do you get the GT500 gauges?
How easy is the tremec fluid change? No lift.

 

[KrucaBomba]

OK, here it is - steering wheel installed:

Orange stripe matches orange on the chairs pretty well:

 

[aham23]

What did I do? Paid for it!

 

[cerbomark]

got alignment before the 12 months expired.

 

[murick]

If you decide to still go the MGW route let me know, I’m not gonna install mine

Why not?

 

[Rhyanski]

Just got the winter tires and a new set of wheels.
I'm planning to install the summer rubber on these wheels, and use the 5-spoke stock wheels for the winter set.

 

[Prodigal]

Just got the winter tires and a new set of wheels.
I'm planning to install the summer rubber on these wheels, and use the 5-spoke stock wheels for the winter set.

Good looking. Who makes the wheels and what are the specs on them?

 

[Rhyanski]

Good looking. Who makes the wheels and what are the specs on them?

These are Ford's. They come as options on the 2021 Mach1. My M1 came with the stock 5-spoke wheels, but I loved these so much, and I couldn't help it but order them. Also they seem to be better for the summer as they seem kind of more 'open'.

Stock goes for the winter...

Summer going to look like this

 

[cerbomark]

ordered steeda full length jacking rails . Then will come my 1 st oil change when I get them on.

Sponsored