vortech BAP mounting help

[asylum938]

I received the standard Vortech bap in my beefcake special kit.

I know the fpdm is under the seat and I confirmed correct wire splice with Terry earlier today however I don't know if it's a good idea to mount under the seat or should I mount in the trunk and extend the bap wires to the fpdm

Anyone else with this setup? Where did you mount yours?

Sponsored

 

[r1lovin]

If its a pp car mount it I the spare tire area.

 

[asylum938]

It is a PP car, I guess I'll just buy some wire to extend to the fpdm, the wires from the bap are quite short.

 

[isedawishy]

I mounted mine in the trunk using some extra wire. It's been replaced with a Fore fuel controller, but same concept.

 

[Stevenjasmin]

I mounted mine (same BAP) behind the plastic trim panel on the passenger side. Fit perfectly.

 

[beefcake]

I mounted mine (same BAP) behind the plastic trim panel on the passenger side. Fit perfectly.

Yep

 

[asylum938]

I mounted mine (same BAP) behind the plastic trim panel on the passenger side. Fit perfectly.

OK so basically same spot as fpdm just opposite side and extend wires?

 

[Stevenjasmin]

OK so basically same spot as fpdm just opposite side and extend wires?

So not sure why I typed passenger. I meant the drivers side backseat panel, the wires on the BAP are long enough. Here is a photo. You can see the BAP from behind the panel. When the seat is in its location nothing is visible

 

[Tommy V]

Is this one plug and play like Jms bap?

 

[Inigo]

Is this one plug and play like Jms bap?

Does anyone want a write up?

I fly home for the 4th and can put something together

 

[JadedGT]

Rust proof those holes with some primer or something if you haven't already someone is going to have holes in their trunk later on.

 

[ColtonimusPrime]

Does anyone want a write up?

I fly home for the 4th and can put something together

I would definitely appreciate one. I'm fixing to install mine. I'm always bad with wires.

 

[Magnetic]

In 4 a write up.

 

[JadedGT]

Would like a write up as well installing mine in a couple weeks.

Sponsored