Vmp tune

[scott_0]

yeah think there about 20 min away from west chester

ill have to check into it when im ready id have to get the sensor and harness with lund though plus a ngauge then a tune which is no problem if they can in house my tune on there dyno if avil

they do not have a shop with own dyno as far as I know, you could go through Evolution Performance and have him tune you on their dyno

Sponsored

 

[Tacostrk]

Are there any tuners out there using HP tuners for the Roush? Would we be able to flash back to the Roush tune in a warranty situation?

I believe VMP and PBD will tune with hptuners if asked

 

[BV600]

I believe VMP and PBD will tune with hptuners if asked

Dyno Appt Only for VMP

 

[KPY4EHET]

Need help!!!
Have received a custom tune for my roush phase 2 from VMP but my Ngauge dont see it as the file ends with .hpt
Have researched online and i think it should be ending with .enc.
Renamed it to .enc and now ngauge can see it but i am afraid to flash it. Does anyone have a vmp tune file and can check what the ending of the fail is? for Ngauge tuner
Thanks

 

[Tacostrk]

Need help!!!
Have received a custom tune for my roush phase 2 from VMP but my Ngauge dont see it as the file ends with .hpt
Have researched online and i think it should be ending with .enc.
Renamed it to .enc and now ngauge can see it but i am afraid to flash it. Does anyone have a vmp tune file and can check what the ending of the fail is? for Ngauge tuner
Thanks

I wouldn’t. File has to be saved in the correct format I believe. Renaming it could have bad consequences

 

[Bartly]

I wouldn’t. File has to be saved in the correct format I believe. Renaming it could have bad consequences

I second this. Had a local guy write a tune in hpt and he had to export it out of HPTuners as an .enc before it could be used in the Ngauge.

 

[KPY4EHET]

I wouldn’t. File has to be saved in the correct format I believe. Renaming it could have bad consequences

have the stock file to go back to but dont know if i would be able to.
the bad thing i have 2 car shows this weekend and i did a bunch of upgrades so i cant drive the stock roush tune now it running too rich , have twin jet 67 1000cc injectors and 125 jlt upgrade to base roush phase 2

 

[KPY4EHET]

I second this. Had a local guy write a tune in hpt and he had to export it out of HPTuners as an .enc before it could be used in the Ngauge.

thats unbelievable ! been waiting 22 days for this tune and now i cant even drive my car. took me 20 hours to install roush phase 2 with no problems and those guys cant write a proper tune in 22 days!

 

[Tacostrk]

have the stock file to go back to but dont know if i would be able to.
the bad thing i have 2 car shows this weekend and i did a bunch of upgrades so i cant drive the stock roush tune now it running too rich , have twin jet 67 1000cc injectors and 125 jlt upgrade to base roush phase 2

Hopefully you have tried emailing/calling Vmp.

 

[KPY4EHET]

Hopefully you have tried emailing/calling Vmp.

tried every possible way of contact but those guys are unavailable after 4.99pm on Friday till 9.00 am Monday

 

[GTFORMULA]

Back in 2012 i had a brand new gt500. I bought the newest VMP blower and tons of other parts. Like 6k worth of stuff. Scheduled dyno tuning. Drove all the way there with a crap base tune. Got there and they forgot about my appt and ole Justin was watching his kid and Rebecca was going to some class. Wouldn't tune the car. Wouldn't data log for a street tune. Nothing. Wasted a lot of time and money going there. Will never rely on them again. Hope you get squared away.

 

[sy1462]

I had a rocky start as well... car went into limo mode and they were at SEMA and couldn’t resolve.. I will say though that the tune I have now is extremely good. I’ve never seen a datalog file look better and the car drives better than I ever expected. Response is tough from them but they do deliver a very good product. Won’t help your car show though.... wish I could help more but I have a SCT programmer

 

[TX-Ripper]

Need help!!!
Have received a custom tune for my roush phase 2 from VMP but my Ngauge dont see it as the file ends with .hpt
Have researched online and i think it should be ending with .enc.
Renamed it to .enc and now ngauge can see it but i am afraid to flash it. Does anyone have a vmp tune file and can check what the ending of the fail is? for Ngauge tuner
Thanks

They have to export the file in hptuners, if you try to load a renamed filed it could brick your computer.

Don’t Risk it.

Sponsored