TRIPLE YELLOW S550 MUSTANG Thread

[JoeDogInKC]

Rep said sub was part of the shaker sound system. No mention of Shaker Pro.
He did say the Ecoboost is estimated to be over 320HP.

Awesome, thanks! Nice job getting some more information!

I'm kind of thinking that the 12 speaker Shaker Pro will have 2 subwoofers and 4 rear deck speakers (2 separate mids and tweets) instead of coaxial 5x7's / 6x8's.

Sponsored

 

[Husker]

Anyone else notice how the hood is either bowed in the middle up front or it is very misaligned?

I bet it's not the hood but the front around the grill not mounted/tied down properly-->:shrug:

 

[JoeDogInKC]

I bet it's not the hood but the front around the grill not mounted/tied down properly-->:shrug:

Could be, yeah. I'm sure hoping that this is a sign of pre-production versus production. Let's hope that the panels line up much better in the production cars.

 

[Husker]

Could be, yeah. I'm sure hoping that this is a sign of pre-production versus production. Let's hope that the panels line up much better in the production cars.

They will.

 

[JoeDogInKC]

They will.

- I'm sure they will too. Otherwise they'll have taken a step backwards. The fit/finish on the current model has been pretty good compared to previous ones.

 

[BONESTOCK]

Great photos!!

 

[JoeDogInKC]

Am I the only one not looking forward to that first battery change?

 

[nbad]

Great photos!!

Thanks!

 

[tbonez3858]

This car is sick....Bright colors look so good.

 

[JoelinNOVA]

wtf.....the bubbles in the vinyl around the cupholders ?

Looks like they didn't remove the plastic over it for shipping. Car is getting closer to production. This one looks close. The hood needs to be adjusted which is typical. All panels will be.

 

[JoelinNOVA]

Could be, yeah. I'm sure hoping that this is a sign of pre-production versus production. Let's hope that the panels line up much better in the production cars.

Joe
Look at the one pic up close. You can see the battery cables going under the plastic cover. I bet the cover comes off easy. I have similar covers over mine on both sides. Sure looks cleaner glad I won't have to buy them for the 15

 

[nbad]

Looks like they didn't remove the plastic over it for shipping. Car is getting closer to production. This one looks close. The hood needs to be adjusted which is typical. All panels will be.

They said this one was hand crafted a few months ago and "crawl" it onto the trailer.

 

[danielc]

Thanks for sharing, great photos to see the car. Was this in Ontario?

 

[JoeDogInKC]

Joe
Look at the one pic up close. You can see the battery cables going under the plastic cover. I bet the cover comes off easy. I have similar covers over mine on both sides. Sure looks cleaner glad I won't have to buy them for the 15

I think you quoted the wrong post of mine, but yes, you'll have to take that black plastic cover off to get to the battery. However, it's lodged back behind the passenger side front strut, so it looks like it may be a bit more difficult to wiggle out, even with the cover off.

 

[Free Agent]

Hmmm..... Battery relocated somewhere other than under the hood?? Or is it just covered up?

Looks like it might be right in front of the passenger side cowl?

Yep, underneath that black cover on the passenger side cowl.

Seriously though, I wonder what's up with those bubbles around the cupholders. Maybe they made a wrap to simulate the production plastic pattern?

Hopefully pre-production materials. Worrisome if that is the final material. It would have a recall before it hit the lots.

Anyone else notice how the hood is either bowed in the middle up front or it is very misaligned?

Not until you mentioned it but it is noticeable. Again lets hope it is pre-production misaligned.

Sponsored