Tri-Bar DRL Headlamps

[Aus-MustangGT]

It's just a simple fuse tap in your fuse box. So when the ignition is on, the lights go on.

So a fuse tap means putting an extra fuse in the fuse box with a wiring that requires to be soldered onto wire coming out of the ballast? :headbonk:

Sponsored

 

[ivonovi]

And there is another thing to consider...did some digging around and the LHD light units are focused differently... so yes u could plonk them on the RHD cars...but they would dazzle the oncoming traffic and you would have less light on the left side.

In the UK and Europe you can get done in for that..i.e get tickets. Dont know the law here..but am sure the cops could pick on that if they wanted to.

 

[HybridGT]

So a fuse tap means putting an extra fuse in the fuse box with a wiring that requires to be soldered onto wire coming out of the ballast? :headbonk:

It'll just look like this. No soldering.

You can always take it to an auto electrician of you're not comfortable attaching a wire into the fusebox

 

[HybridGT]

And there is another thing to consider...did some digging around and the LHD light units are focused differently... so yes u could plonk them on the RHD cars...but they would dazzle the oncoming traffic and you would have less light on the left side.

In the UK and Europe you can get done in for that..i.e get tickets. Dont know the law here..but am sure the cops could pick on that if they wanted to.

True. Except this isn't a LHD headlamp.

 

[Aus-MustangGT]

It'll just look like this. No soldering.

You can always take it to an auto electrician of you're not comfortable attaching a wire into the fusebox

Id be able to do that haha......why didn't you just say that :lol:

 

[HybridGT]

Id be able to do that haha......why didn't you just say that :lol:

I did lol... :shrug:

 

[caniggia]

Here you go, there us nothing inside, everything needs to be built in. My price for that is 500EUR (375 only DRL and running lights), shipping to Australia with Fedex 100USD (not including lamps):

[ame]

 

[Aus-MustangGT]

So for anyone who is interested that equates to approximately $720 AUD for just the tribar leds.

Or $920AUD for everything built in.

Assuming you would also need to remove your headlamps and send to Poland that could be an extra $150+

 

[caniggia]

Please take into account that build in ready sets like Diode dynamics or Lightning firm by opening front glass is PAIN, real PAIN. And lamp never looks stock then when hood is open.
I do that other way and then when hood is opened, nothing is visible.
Also glass in this model is ultra cheap, i damaged my first 3 lamps and had to buy them back to customers, so it was expensive learn...

 

[FPV GT]

Here you go, there us nothing inside, everything needs to be built in. My price for that is 500EUR (375 only DRL and running lights), shipping to Australia with Fedex 100USD (not including lamps):

caniggia....... YOU ARE A LEGEND and a CHAMPION.

I think that you maybe become quite busy, as what you have achieved - IS AWESOME :hail::hail::hail::hail::hail:

 

[caniggia]

Front and rear installed

[ame]

 

[Diode Dynamics]

Please take into account that build in ready sets like Diode dynamics or Lightning firm by opening front glass is PAIN, real PAIN. And lamp never looks stock then when hood is open.
I do that other way and then when hood is opened, nothing is visible.
Also glass in this model is ultra cheap, i damaged my first 3 lamps and had to buy them back to customers, so it was expensive learn...

We don't offer housings through our site. We designed and manufacture the RGBW and RGBWA LED board replacements themselves.

Nick C.

 

[caniggia]

Yes, i know. Any way they are great products. Im in contact with one of your workers, soon i will install your product also, i have few customer askings, greetings

 

[Diode Dynamics]

That'd be me Pawel LOL

Nick C.

 

[Bushranger]

A possible low cost solution to the tribar DRL fiasco

I noticed that the Euro cars have fairly bright tribars when the headlight is on.
So I was just wondering if we could insert a bright led globe into the top of the headlight housing and aim it at the tribars and have it wired to the fog DRL circuit so that it operates as DRLs should? The reflection might vary as you walk around the car, but a cleverly placed LED strip may optimise the effect. This might even be possible without removing the headlight, if we turn the car upside down to shake out the plastic filings.
Just a thought.

Sponsored