Sponsored
Trackaholic
Well-Known Member
My brake rotors click during cornering. I hear it mostly from the fronts. Put on new rotors (due to wear, not clicking), and the new set clicks less than the previous ones. I just pretend that I have playing cards in my spokes.
-T
-T
galaxy
Well-Known Member
- Thread starter
- #19
Thanks for all the feedback guys. Did a quick inspection and nothing loose or funny going on at either axle. I didnāt mess with the axle nuts as they seemed solid and nothing was amis to justify disturbing the nut, so I let it be. Lug nuts are torqued properly. They were to begin with, but put them back on again.
I figured with the same sound equally occurring in both directions that it must be ānormalā for the car. I mean, what are the odds of having a malfunction occurring on both sides at the same time at equal forces/directions?? Itāll be a while before I have a chance to expose it to those conditions again to see if reoccurs after checking lugnut torque, but not too worried about it.
I figured with the same sound equally occurring in both directions that it must be ānormalā for the car. I mean, what are the odds of having a malfunction occurring on both sides at the same time at equal forces/directions?? Itāll be a while before I have a chance to expose it to those conditions again to see if reoccurs after checking lugnut torque, but not too worried about it.
galaxy
Well-Known Member
- Thread starter
- #20
I meant to circle back and update this thread. I recently upgraded to the longer MSI wheel studs from OPM. Installed them in the stock hubs. I did completely remove the hubs for the install, and then reinstalled the hubs with new nuts and factory rec torque. I've had the car back in the mountains since the install and this process seems to have eliminated my ticking sounds from the rear axles. Go figure.
Nfs1000f
Well-Known Member
- Joined
- Jan 1, 2018
- Threads
- 66
- Messages
- 1,035
- Reaction score
- 1,092
- Location
- Upstate NY
- First Name
- Neal
- Vehicle(s)
- 2017 GT350 & 2019 Ford Fusion SEL Hybrid
My left front wheel ticked when cornering since I purchased the car. Recently I replaced the garbage stock wheel lug nuts with Gorillas and the ticking stopped. Why, I donāt know.
Previously when I had removed the wheel and re-torque the stock lug nuts the ticking would subside only for a short period of time. It has been over 1000 miles with the new lug nuts.
Previously when I had removed the wheel and re-torque the stock lug nuts the ticking would subside only for a short period of time. It has been over 1000 miles with the new lug nuts.
Sponsored
