Think these will fit?

[Evilcactuar]

I have a mach 1 handling pack car, I want a second set of wheels and tires for fall / early spring so I can drive the car a little more (in Connecticut, its dipping below where the tires are happy right now in the evenings and mornings). I ordered 4 closeout cooper zeon RS3-0G1 in 305/30R19, and was thinking I could get the American Racing Mach five wheel, they're available in 19x11 with both a 25mm offset and a 50mm offset. Will the 25mm offset fit the front with a 305?

Sponsored

 

[Discount Tire]

The +25 should fit. That offset will bring the tire to the edge of the fender. It will be close.

 

[DRAGOON]

I have a mach 1 handling pack car, I want a second set of wheels and tires for fall / early spring so I can drive the car a little more (in Connecticut, its dipping below where the tires are happy right now in the evenings and mornings). I ordered 4 closeout cooper zeon RS3-0G1 in 305/30R19, and was thinking I could get the American Racing Mach five wheel, they're available in 19x11 with both a 25mm offset and a 50mm offset. Will the 25mm offset fit the front with a 305?

For the same cost you could get the mach1 hp wheel with tpms from 1 of the site’s sponsors:
https://www.levittownfordparts.com/sku/m-1007k-mach1h.html

 

[SheepDog]

I have a mach 1 handling pack car, I want a second set of wheels and tires for fall / early spring so I can drive the car a little more (in Connecticut, its dipping below where the tires are happy right now in the evenings and mornings). I ordered 4 closeout cooper zeon RS3-0G1 in 305/30R19, and was thinking I could get the American Racing Mach five wheel, they're available in 19x11 with both a 25mm offset and a 50mm offset. Will the 25mm offset fit the front with a 305?

Yes

 

[Evilcactuar]

I was considering grabbing those, and i'm not opposed, theyre a great looking wheel. I was hoping to get some lighter wheels. These are like 24lbs and I believe the Ford performance wheels are closer to 35. I looked at some of the mrr and sve wheels (again, because to save weight) but didn't find anything that would fit a 305 tire.

 

[Need4SpeedMotors]

I have a mach 1 handling pack car, I want a second set of wheels and tires for fall / early spring so I can drive the car a little more (in Connecticut, its dipping below where the tires are happy right now in the evenings and mornings). I ordered 4 closeout cooper zeon RS3-0G1 in 305/30R19, and was thinking I could get the American Racing Mach five wheel, they're available in 19x11 with both a 25mm offset and a 50mm offset. Will the 25mm offset fit the front with a 305?

The 19x11 +50 offset for the rear will fit perfect, the front 19x11 +25 will have a slight more of a poke than the factory 19x10.5 +24. A slight alignment change for the front will help with the poke.

 

[Evilcactuar]

Yes, I decided on P51's in 19x11 and 24 and 50 offsets, almost these exact sizes, ran it through a calculator and came up with an additional 6mm in the front of poke. I figured i'll adjust the camber a touch from 1 to 1.8 and I should be in business. (I also ordered some rokblokz)

 

[shogun32]

Will the 25mm offset fit the front with a 305?

Yup. But you might want to downsize to 9.5 or 10 for massively more selection and more ground pressure.

The mrr m600 seems to available again. I've got a new 10/11 combo if interested ($700). Or you can find 10 square esp on eBay for about thousand.

 

[Evilcactuar]

I ordered everything last week so its a moot point, but I wanted to stay with the largest rubber I could get. I understand thats pretty limiting on tire choices.

Sponsored