melwff
Well-Known Member
- Joined
- Oct 4, 2016
- Threads
- 6
- Messages
- 883
- Reaction score
- 299
- Location
- Danbury,CT
- Vehicle(s)
- 2021 Mach 1 M2486
- Thread starter
- #1
has anybody had to use the temporary tire mobility kit with the 20" wheel option and run into an issue where the screw on end of the compressor hose cannot be screwed on tight enough to get a good seal and not let more air out?
I have used the compressor successfully without this issue on a Toyota that had a flat tire and also tried it on my wifes' Buick Regal sucessfuly. The problem appears to be that the valve stem is not long enough to fully seat against the O ring in the hose connector. The Mustang stem is about 9mm and the Buick is about 10mm.
I have used the compressor successfully without this issue on a Toyota that had a flat tire and also tried it on my wifes' Buick Regal sucessfuly. The problem appears to be that the valve stem is not long enough to fully seat against the O ring in the hose connector. The Mustang stem is about 9mm and the Buick is about 10mm.
Sponsored