subwoofer box option

[vnzbd]

https://store.audiodesignscg.com/product/2015-2017-mustang-subwoofer-box/

Was plunking around and found this. Another option and much less that the JL option. They don't bolt down though, just pressure fit.

.9 cubic feet for the passenger side, .6 cubic feet for the drivers side.

Sponsored

 

[wildcatgoal]

Nice. Never heard of Audiomobile but can't be worse than the stock POS.

 

[vnzbd]

Also unfamiliar with Audiomobile. I purchased sans subwoofer you can drop in your own. The JL TW3 looks like a good fit for the drivers side. I like the Zenclosures but this keeps your rear seat drop down option.

 

[xraystyle]

Nice. Never heard of Audiomobile but can't be worse than the stock POS.

Don't bother with the loaded enclosure. Just get the box and throw in the same sub that comes in the JL Stealthbox.

http://www.jlaudio.com/12tw3-d4-car-audio-tw3-subwoofer-drivers-92185

 

[plc268]

https://store.audiodesignscg.com/product/2015-2017-mustang-subwoofer-box/

Was plunking around and found this. Another option and much less that the JL option. They don't bolt down though, just pressure fit.

.9 cubic feet for the passenger side, .6 cubic feet for the drivers side.

Yea, I bought one a little while back. I plan on installing it this week. The quality is fantastic, and fits like a glove.

 

[SQ_S550]

Audiomobile is a solid woofer company, they have been around for the better part of 20 years. The Audiomobile woofers are geared more toward sound quality applications. The woofers being offered with this enclosure are their lower level drivers, but they are going to be equivalent to the JL W6 where performance is concerned. These will be a solid shallow mount woofer with 2" peak to peak excursion.

The enclosure looks nice with the stacked wood back! Most builders would just use fiberglass as it would be cheaper.

 

[wildcatgoal]

...and much lighter.

 

[vnzbd]

Do the back corner subs rattle the trunk lid, license plate like the rear firing subs?

 

[vnzbd]

PLC268, does it have a speaker terminal cup or did you have to drill the enclosure?

 

[plc268]

No terminal cup. It came prewired with a length of speaker wire (don't know the exact length) coming through a drilled and sealed hole.

 

[KevinG]

Meh, just build a custom fiberglass enclosure. You have many options going this route, plus the satisfaction of seeing your own work when its all done...

 

[brandonc]

zen closures has some real nice ones. havent ordered from them just yet, but I plan on it.

 

[plc268]

Meh, just build a custom fiberglass enclosure. You have many options going this route, plus the satisfaction of seeing your own work when its all done...

That's not exactly practical for most people.

 

[mumbles]

That's not exactly practical for most people.

C'mon now... a little resin, a little fiberglass mat... how hard could it be? ;)

 

[Bartly]

Meh, just build a custom fiberglass enclosure. You have many options going this route, plus the satisfaction of seeing your own work when its all done...

That's not exactly practical for most people.

C'mon now... a little resin, a little fiberglass mat... how hard could it be? ;)

Taking this advice I just accidentally spilled a quart of resin onto the trunk area last night tried cleaning it out of the carpet with windex but wasn't working so I left it for morning, what do you think a little simple green with a heat gun, that ought to clean it up? Just kidding, sounds like a walk in the park.

Sponsored