Step by Step Guide to Enabling Blind Spot Information System (BLIS) and Cross Traffic Alert (CTA)

[Falk03]

The sensor gets the information on which side it is mounted through the wiring. On one side the ground is fed to 2 terminals.

Sponsored

 

[Blade007]

hi guys, on a side note, does anyone know what gauge wires is used for the heated mirrors?
thanks

 

[Falk03]

hi guys, on a side note, does anyone know what gauge wires is used for the heated mirrors?
thanks

22 AWG

 

[Blade007]

Thanks @Falk03

 

[Blade007]

Just an update,
I was getting ready to get the wiring and install of the sensors this weekend but i ordered the pigtails from Rock auto and it's still sitting on their shelves. I paid so that i could have it here today and they gave me a tracking info but never called the carrier for the pickup.
They have no customer service and when you try to cancel/return they won't help.
I am reaching out to my credit card company to dispute the charges. They can keep it on their shelves

Just some things I have found out along the way. The pigtail is superseded by a new part number Part #FU2Z-14S411-ADB. Also the price has doubled to about $31 and while rock auto seems to have it at the lowest price you are better served to purchase elsewhere.
I'll have to settle for running the wires this weekend and figure out some other time to remove the bumper and setup the sensors.

Also, I was able to get both sensors and brackets from a 2017 gt with less than 6K miles for $120 shipped. This is the ebay seller https://www.ebay.com/str/wadesmotorsport in case anyone was looking
Thanks

 

[Blade007]

Hey guys
In case anyone has the bracket and not the mounting component for the brackets, here is the part number. W714293S424
Ford sells them in a pack of 3 or individually. I was quoted $21 for 4. Wade motor sport on ebay sent me those for free and paid for shipping. I will definitely keep checking his store for other parts I might need in the future

Also, if anyone needs the screws to bolt the monitors to the bracket you can get this at Homedepot.https://www.homedepot.com/p/M4-0-7-...u:{887480011784}:qu+smf:{ca,br}:smf+nf:{1}:nf

A 1" length will work perfectly

 

[Magony15]

Cant believe you found the Ford part number for those clips. I searched forever on a couple of Ford online part sites trying every keyword I could think of. Even tried my worthless local Ford dealer. He couldn't find them. I've bought from Wade in the past. They are a great source. Thank's.

 

[Blade007]

Glad it helped. They weren't the easiest things to get a part number for, lol

 

[Blade007]

Hey guys, getting ready to install my modules. I had a quick question. My modules came form a 2017 GT. Do i have to do any programming on these?
Thanks guys

 

[300mag]

Hey guys, getting ready to install my modules. I had a quick question. My modules came form a 2017 GT. Do i have to do any programming on these?
Thanks guys

Yes, the modules need to be programmed through forscan and is covered in the guide in beginning of thread. It took only 5-10 minutes to do both modules.

 

[Blade007]

Thanks man

 

[Blade007]

Hi Guys, another question. What gauge wires are you using for the sensors? From the OP post it looks like those are 16 gauge. Would 22 gauge work fine?
Thanks

 

[JRedondox]

Hi Guys, another question. What gauge wires are you using for the sensors? From the OP post it looks like those are 16 gauge. Would 22 gauge work fine?
Thanks

im about to order all the parts. What is the wire gauge you guys used?

 

[Falk03]

Most of the lines are 22, only the ground connections are 20 if you are talking about BLIS.

 

[Blade007]

If I use 22 for the grounds that will not work correct? I ran 22 gauge for all the wires

Sponsored