Sleek_gt
New Member
- Thread starter
- #1
Ok so here’s what’s happening. I had Accelatec springs installed on my 20 GT PP1. They creaked severely. So I went ahead and ordered a set of the ultralite linear. Swapped them the day I got them to get ride of the horrible creaking.
I ordered these springs under the impression they have the same drop height as the progressive sport. But these are lower in the rears then the front, they don’t look anything like the pictures of the progressive sport springs is this normal? I will be “ re-clocking” bushings to see if this helps. Also the passenger front is 1/4 inch higher.
Steeda your reputation and service is top notch. Any suggestions, would I be able to swap these out for progressive sports? I’ve only put 40kms on these springs
Thanks
I ordered these springs under the impression they have the same drop height as the progressive sport. But these are lower in the rears then the front, they don’t look anything like the pictures of the progressive sport springs is this normal? I will be “ re-clocking” bushings to see if this helps. Also the passenger front is 1/4 inch higher.
Steeda your reputation and service is top notch. Any suggestions, would I be able to swap these out for progressive sports? I’ve only put 40kms on these springs
Thanks
Sponsored