Stainless works gt350 vs gt long tube headers

[nicolasfinta1]

So I just bought myself a gt350 previously I had a mustang gt with long tube headers I called stainless works and they told me that they where different so I ordered another set of headers for a gt350 and today I put them side by side and they look absolutely identical does anyone know if they are actual different or if I’m missing something the cleaner headers are the headers from the 350

Sponsored

 

[Brazos609]

Cleaner? They both look used. All new headers I've seen were clean and stiney, those look like they've been run. I thought GT350 headers had a different bolt pattern.

 

[DougS550]

Those are not new LTH?

 

[nicolasfinta1]

Cleaner? They both look used. All new headers I've seen were clean and stiney, those look like they've been run. I thought GT350 headers had a different bolt pattern.

I don’t mean new new they are used the shiny surfaced headers are from a gt350 from the parts farm

 

[NGOT8R]

Both sets of headers do look identical. Have you checked the flanges from the GT headers at the GT350 headers to see if the bolt patterns line up?

 

[Brazos609]

Like this:
Coyote: \ \ / /
Voodoo: \ / \ /

 

[nicolasfinta1]

Both sets of headers do look identical. Have you checked the flanges from the GT headers at the GT350 headers to see if the bolt patterns line up?

Yea they lined up

 

[nicolasfinta1]

Also If you go on stainless works website they look identical in there listings

 

[nicolasfinta1]

Both sets of headers do look identical. Have you checked the flanges from the GT headers at the GT350 headers to see if the bolt patterns line up?

In the second photo you can see they line up exactly

 

[nicolasfinta1]

Like this:
Coyote: \ \ / /
Voodoo: \ / \ /

Yea I see that on the stock headers but on every website the stainless works headers bolt pattern for both gt350 and gt are \ \ / /

 

[Brazos609]

Yea I see that on the stock headers but on every website the stainless works headers bolt pattern for both gt350 and gt are \ \ / /

I think you can use them on your GT350 because Voodoo heads actually have stud holes in both locations at the middle cylinder exhaust port. You just need to use GT exhaust gaskets instead of GT350.

 

[DougS550]

Also If you go on stainless works website they look identical in there listings

Have you called them and ask?

 

[nicolasfinta1]

Have you called them and ask?

I did and they just told me there different but I think they might be the same

 

[GregO]

https://www.stainlessheaders.com/product/ford-52l-voodoo-stainless-header-flange/

 

[nicolasfinta1]

https://www.stainlessheaders.com/product/ford-52l-voodoo-stainless-header-flange/

Hmmmm strange why they have different flanges yet for the headers they are exactly the same does anyone know if there’s part numbers or verification numbers on the headers to confirm which headers they are cause the parts farm took them off a gt350 so I’m assuming they fit

Sponsored