SSR rims

[Carlosa_garcia]

What I usually do with those apps is load the wheel sizes I have and compare to what is available and see how closer it is to fender and suspension. So I know what offset I have now and then load new wheel and if it says tire will stick out .5" more I know its too aggressive and vice versa.

Sponsored

 

[Carlosa_garcia]

Another helpful website is Willtheyfit.com.

 

[MustangScooter]

I was thinking
20x11+49 for the rear and
20x10+37 for the front

 

[Need4SpeedMotors]

Ok so I know im a bit late to this thread so first off [MENTION=20369]MustangScooter[/MENTION] sorry for that delay. Other then that thanks to everyone that tagged me in this thread I appreciate that you trust me enough to help out.

Based on the design the wheel has a nice drop center curve to it which should allow for a nice proper caliper to wheel clearance ( x factor)

So for the front you can do the following

20x9.5 ET 25 or 20x10 ET 24

Rear I would do

20x11 ET 49 ( but my concern is the depth being so deep it can hit the caliper) So this is something I would say you want to check if you can get the x factor for the wheel I can check with my spreads and see what they have.

Option # 2

20x11 ET 57

 

[MustangScooter]

Ok so I know im a bit late to this thread so first off [MENTION=20369]MustangScooter[/MENTION] sorry for that delay. Other then that thanks to everyone that tagged me in this thread I appreciate that you trust me enough to help out.

Based on the design the wheel has a nice drop center curve to it which should allow for a nice proper caliper to wheel clearance ( x factor)

So for the front you can do the following

20x9.5 ET 25 or 20x10 ET 24

Rear I would do

20x11 ET 49 ( but my concern is the depth being so deep it can hit the caliper) So this is something I would say you want to check if you can get the x factor for the wheel I can check with my spreads and see what they have.

Option # 2

20x11 ET 57

"if you can get the x factor for the wheel"

how would i get this information??? i thought that maybe the disk information in the corner of the pic was speaking of caliper clearance? or am i off on that

cheers heaps again for your help i am also open to suggestions from anything you have on offer thats similar.... like i mentioned i will be in the country on holiday in May/June and will visit your brick and motor location for a chat and a look around at whats on offer

 

[Need4SpeedMotors]

"if you can get the x factor for the wheel"

how would i get this information??? i thought that maybe the disk information in the corner of the pic was speaking of caliper clearance? or am i off on that

cheers heaps again for your help i am also open to suggestions from anything you have on offer thats similar.... like i mentioned i will be in the country on holiday in May/June and will visit your brick and motor location for a chat and a look around at whats on offer

No worries, so the x factor is the clearance that the wheel provides ( wheel face to caliper) They should have that info themselves.

 

[MustangScooter]

No worries, so the x factor is the clearance that the wheel provides ( wheel face to caliper) They should have that info themselves.

Ok Paul im hoping you can help out on this and sorry to ask so much of you

i emailed a few places selling SSR's and they wont give me wheels measurements but said if i can find out the below measurements they can match them up for me. you dont happoen to have this information handy do you???

 

[Need4SpeedMotors]

I believe I do so ill pull it up for you.

 

[MustangScooter]

front and rear? ur a legend

 

[Need4SpeedMotors]

front and rear? ur a legend

yes sir, thanks haha never been called that but appreciate it.

 

[MustangScooter]

yes sir, thanks haha never been called that but appreciate it.

Might be an Australian thing lol

 

[Need4SpeedMotors]

Might be an Australian thing lol

LMAO

 

[MustangScooter]

LMAO

sorry if i missed it, did you post it up somewhere?

 

[Chameleon]

Those SSR's look so damn sexy!

 

[lisandra]

Omg beautiful wheel, [MENTION=11685]Need4SpeedMotors[/MENTION] do you deal this kind of drug?

Sponsored