woot
Active Member
- Joined
- May 22, 2015
- Threads
- 6
- Messages
- 42
- Reaction score
- 11
- Location
- SF Bay Area, CA
- Vehicle(s)
- '16 GT Premium PP
How's the color match for magnetic?
Sponsored
I've been checking it roughly twice a week for the past 2,000 miles and even in the heat it doesn't want to budge. I used the 3M VHB tapeHow have these been holding up with just 3M since its been hot out? I used a liberal amount of 3M 30lb tape on a stock GT spoiler I got, but noticed the right corner lifted off the body due to heat.
I used the 3M "Extreme" tape from HD to mount my dash cam and my cam fell off on a hot summer day. That's why I went through the trouble of getting the VHB tape. The grip of that tape is an order of magnitude greater than the HD tape I had.so i had an interesting conversation with a gal that works at 3m locally. definitely dont get the 30 pound exterior tape from home depot, VHB is rated up to 90 pounds!!!
Advised me to let it fully cure for 9 days before washing or pulling or putting any weight on it. after those 9 days itll be stronger than a rivet or screw
Tell that bitch they need to hire a new painter and do correct job in painting the parts they sale.so i had an interesting conversation with a gal that works at 3m locally. definitely dont get the 30 pound exterior tape from home depot, VHB is rated up to 90 pounds!!!
Advised me to let it fully cure for 9 days before washing or pulling or putting any weight on it. after those 9 days itll be stronger than a rivet or screw
Same w my Ikon.Mine is from ikon and has the raised lip but the VHB tape was not completely concealed by the lip. It's really not noticeable unless you're looking directly down at the bonding point.