Roush 727 injectors

[sy1462]

me too

Mine too.. just use a 6-point deepwell and take it easy on it (ie remember you are turning a piece of plastic)

Sponsored

 

[torino501]

what is this iat mod that yall speek of...?

 

[spogshd]

what is this iat mod that yall speek of...?

It allows the tuner to read info that can't be seen otherwise, not sure what just know it was needed.

 

[Bahndvr]

what is this iat mod that yall speek of...?

It gives post blower IATs instead of pre blower IATs. I'm to understand that when you look at your IAT in your dash menu you are actually looking at those post IATs.

 

[HextallS550]

It gives post blower IATs instead of pre blower IATs. I'm to understand that when you look at your IAT in your dash menu you are actually looking at those post IATs.

What shows in the dash menu is the IAT at the MAF. If you have the Roush cal the second IAT is actually a MCT. This can only be read by datalogging.

Go with ID 1050x injectors, better data, better quality, room to grow.

 

[Bahndvr]

What shows in the dash menu is the IAT at the MAF. If you have the Roush cal the second IAT is actually a MCT. This can only be read by datalogging.

Go with ID 1050x injectors, better data, better quality, room to grow.

Oh okay.

Would I need the hat adapter or are they plug-and-play?

 

[HextallS550]

I'd need to double check with Paul which length that Roush is using, on my Whipple we use GT500 length. Most ID injectors have adapters, but they come pre-assembled, you need to worry about any issues. PM me, I can help you out.

 

[torino501]

What shows in the dash menu is the IAT at the MAF. If you have the Roush cal the second IAT is actually a MCT. This can only be read by datalogging.

Go with ID 1050x injectors, better data, better quality, room to grow.

I do like the pre intercooler MAF idea in the message center. could a person put an iat sensor post inetcooler and run a guage on the A pillar? looks like theres a plug for one on the intake manifold?

Sponsored