Repairing a front splitter

[AnthonyA1234]

Can you guys think of something I could use to file down this part of my splitter that got hit? It’s barely noticeable but it’d be nice if I could file down and smooth out the parts that are sticking out.

Any ideas on what I should use to file down the plastic thats protruding?

Sponsored

 

[Torched10]

Can you guys think of something I could use to file down this part of my splitter that got hit? It’s barely noticeable but it’d be nice if I could file down and smooth out the parts that are sticking out.

Any ideas on what I should use to file down the plastic thats protruding?

I use s dremel sanding bit
Use a fine bit.theyre om amaxon

 

[Torched10]

I use s dremel sanding bit
Use a fine bit.theyre om amaxon

Here's link
https://www.amazon.com/Swpeet-Sandi...bbc&gad_source=1#immersive-view_1721057515778

 

[paulm1]

Some 600 grit sand paper, test underneath first to see what the finish will look like. Maybe need to go to 400 grit.

 

[Torched10]

Some 600 grit sand paper, test underneath first to see what the finish will look like. Maybe need to go to 400 grit.

The link i posted has various grits from 60 t0 2500.as I recall i used 600

 

[paulm1]

Yes i saw that, i dont like using machines for touch up work like that, dont have the skill to not screw it up. By hand i can go slow and not go too deep.

 

[AnthonyA1234]

Thanks guys !

Sponsored