Question about GT350 Wheels

[Ashiq73]

Hello,

Question about the GT350 Wheels.

The Ford Part number for the wheels, would that be imprinted on the outside or inside of the wheels?

Also, does anyone know if there are different part numbers for the 10.5" rim and 11" rims?

Thanks

Sponsored

 

[nastang87xx]

Usually inside and yes they are different part numbers.

 

[Paul@PKAUTODESIGN]

The part number will be in the back of the wheel typically behind one of the spokes.

Factory specs are

19x10.5 5x4.5 ET 30 70.5 mm
19x11 5x4.5 ET 62 70.5 mm

 

[firestarter2]

The part number will be in the back of the wheel typically behind one of the spokes.

Factory specs are

19x10.5 5x4.5 ET 30 70.5 mm
19x11 5x4.5 ET 62 70.5 mm

Can we sticky the above and the stock weights im constantly having to look for them

 

[Tflong24]

Can we sticky the above and the stock weights im constantly having to look for them

As far as looking for the weights, just remember they are heavy, super heavy, anchor like, and heavy.

 

[HizliBullet]

GT350 WHEELS PART#
Front
Size: 19x10.5
Bolt Pattern: 4.5 Inch
Offset: 30mm
OE Part Number: FR3Z1007P

Back
Size: 19x11
Lugs: 5
Bolt Pattern: 4.5 Inch
Offset: 62mm
OE Part Number: FR3Z1007Q

 

[Paul@PKAUTODESIGN]

Stock weights, minus the tire sensor and cap is 30.95 front and 30.85 rear

 

[JasinEdward]

Damn..... my 20 inch replicas are 25 and 24lbs staggered...

 

[mspenc45]

Are the OEM wheels forged or cast?

 

[nastang87xx]

Cast.

 

[mspenc45]

So then just about any aftermarket wheels are stronger? Being that mos I've looked at are either forged or spni forged?

 

[firestarter2]

So then just about any aftermarket wheels are stronger? Being that mos I've looked at are either forged or spni forged?

I think there is a strength vs weight factor. Id not assume an after market wheel was stronger

 

[mspenc45]

Wheels

I think there is a strength vs weight factor. Id not assume an after market wheel was stronger

Right, but just comparing similar designs in cast VS forged or spin forged, the later two manufacturing methods should produce a stronger wheel.

 

[Zitrosounds]

I think there is a strength vs weight factor. Id not assume an after market wheel was stronger

Cant forget cost, manufacturing and contractor

 

[nastang87xx]

You can still have a poor quality "forged" wheel.

Sponsored