Puddle lights, non Premium Package GT

[GHOSTRACER]

Or "Pony Projection Lights" as they are called in the package. After searching, I didn't see this topic approached before. Has anyone installed in a non Premium? If so, plug and play? And where did you source the components?

Sponsored

 

[BULL1TT]

I installed these on my car shortly after purchasing it. I bought projectors for a 2014 because at the time(Jan-2015), the 2014 projectors were $36 and the 2015 projectors were $200. The 2014 projectors are aimed at a different angle than the 2015 projector so I had to do some cutting to the bracing inside of the mirror. There is no wiring present for the projectors. I tapped into the dome light circuit and ran one wire into each door. I grounded the lights to the door itself.

 

[GHOSTRACER]

I installed these on my car shortly after purchasing it. I bought projectors for a 2014 because at the time(Jan-2015), the 2014 projectors were $36 and the 2015 projectors were $200. The 2014 projectors are aimed at a different angle than the 2015 projector so I had to do some cutting to the bracing inside of the mirror. There is no wiring present for the projectors. I tapped into the dome light circuit and ran one wire into each door. I grounded the lights to the door itself

Where did you source the parts?

 

[bootyeater69]

not a fan. just a light its ok. but a pony? cmon so cheesy

 

[BULL1TT]

The only thing that I had to buy were the projector lights themselves and you will also need some wire if you don't already have some. I bought the projectors from Tasca Ford. They were $19 for one side and $17 for the other.

 

[GHOSTRACER]

not a fan. just a light its ok. but a pony? cmon so cheesy

Didn't ask for your opinion. As the saying goes on that subject, "everyone has one and ...".

 

[ponie1992]

So, what all needs to be done to the mirror. Cut a hole?

Jeremy
2016 Ruby Red PP GT

 

[Chameleon]

So, what all needs to be done to the mirror. Cut a hole?

Jeremy
2016 Ruby Red PP GT

If you don't want it sticking out like sore thumb, yes.

 

[ponie1992]

If you don't want it sticking out like sore thumb, yes.

What size hole?

Jeremy
2016 Ruby Red PP GT

 

[Chameleon]

What size hole?

Jeremy
2016 Ruby Red PP GT

Just kidding man he is using the 2014 part.

 

[pumxee]

I installed these on my car shortly after purchasing it. I bought projectors for a 2014 because at the time(Jan-2015), the 2014 projectors were $36 and the 2015 projectors were $200. The 2014 projectors are aimed at a different angle than the 2015 projector so I had to do some cutting to the bracing inside of the mirror. There is no wiring present for the projectors. I tapped into the dome light circuit and ran one wire into each door. I grounded the lights to the door itself.

Hey man,

I want to do this soon as well. I already bought the two lights. Just need to cut a hole and wire them in.

How did you go from the door to the dome light? Also wanted to ask huge favour. When and if you have time... could you please make a drawing or something on where to drill the hole and how to cut it exactly?

 

[GHOSTRACER]

BULL1TT, couple of questions:
- do you happen to have the p/n's?
- did they come with a template to cut the hole?

I appreciate your help.

 

[bootyeater69]

Didn't ask for your opinion. As the saying goes on that subject, "everyone has one and ...".

please accept my apology. im sorry

 

[BULL1TT]

The 2014 lights are part number DR3Z-13B374-B ($19.25) and DR3Z-13B375-B ($17.88). The 2015 lights are part number FR3Z-13B374-B ($74.73) and FR3Z-13B375-B ($71.13). The prices are from Tasca Ford. If you use the 2015 lights I do not believe that you will have to trim the inside structure of the mirror. It wasn't a big deal trimming the mirror and when I did the install I saved about $160 using the 2014 lights. I hooked the lights up to 12 volts and saw exactly what direction they were pointing and trimmed the hole in the housing accordingly. I used a drill bit to make the main hole and shaped it with a dremel.
I wired these into the dome light and ran the one wire through an unused spot in the plastic door connector.

 

[ponie1992]

The 2014 lights are part number DR3Z-13B374-B ($19.25) and DR3Z-13B375-B ($17.88). The 2015 lights are part number FR3Z-13B374-B ($74.73) and FR3Z-13B375-B ($71.13). The prices are from Tasca Ford. If you use the 2015 lights I do not believe that you will have to trim the inside structure of the mirror. It wasn't a big deal trimming the mirror and when I did the install I saved about $160 using the 2014 lights. I hooked the lights up to 12 volts and saw exactly what direction they were pointing and trimmed the hole in the housing accordingly. I used a drill bit to make the main hole and shaped it with a dremel.
I wired these into the dome light and ran the one wire through an unused spot in the plastic door connector.

Good info. Thanks!

Jeremy
2016 Ruby Red PP GT

Sponsored