Project NO1CARES (5.2/YSI-B/TH400)

[NO1CARES]

Correct, the new build and the new power numbers.

Ill leave you with a fresh shot of the finally installed bumper.

Sponsored

 

[NO1CARES]

Did some testing on Friday to start adjusting the suspension and determine how the transmission is going to react under power and okay traction. Once the power rolled on and it was out of the warm rubber on the road, it just hazed the tires off. Also learned that my exhaust is hanging way too low. Lol.
Also got some 60-130 data. I did short shift 2-3 because 8500 just sounds so different.
Plenty of work left to do.

 

[NO1CARES]

 

[NO1CARES]

Well, jt-b has came off today and will be with the new owner. Should have my order placed for the ysi-b before the end of the week.

Considering changing up the tire to a quick time pro so it’s dot legal and I can enter into some street classes. Anyone using these?

 

[NO1CARES]

Have yet to order the YSI-b. Decided to focus on some other things before making the purchase. Shouldn't be much longer. I'm already getting an itch.

Anyone going to world cup this weekend????

 

[NO1CARES]

YSIB showed up this past Saturday 11/26. Was so excited to slam it on and the weather was beautiful. Went to begin installing, realized that i left the 3/8 npt to 8an fitting for the drain in the JTB when i sold it. So i put some fittings together to make that work and went to install the 2.9 pulley. That was when i realized that new head unit's don't come with a input shaft key or hardware. So i walked away from it and placed my order with summit to get the parts coming.

Key and hardware will be here Tuesday and adapter fitting today.

Getting close! But once its together, it will be going to be stored in my neighbors garage for the majority of winter. I've got another project coming in that will require my focus.

 

[NO1CARES]

Also looks like I got the ultra rare RACƎ version

 

[Cordero1]

Noice

 

[turnswrench]

 

[JohnnyGT]

Great thread. I read every page.

Awesome project you have!

 

[NO1CARES]

Great thread. I read every page.

Awesome project you have!

Thank you sir.

 

[NO1CARES]

Got the YSIB installed last night but was unable to get it fired up due to a dead battery.. I guess the original battery has finally crapped out. Put it on the trickle charger to see if i can't bring it back to life.

Anyone have any suggestions on factory location batteries? I'd like to utilize the opportunity to go to a smaller sized battery to save weight but would rather not compromise on cca or amp output. Also, keep in mind that eventually. I will be doing a relocation.

 

[andrewtac]

I did the anti gravity atx20, in the factory location. I bought the suggested tender, have had no issues. I think it weighs 5 pounds.

 

[DR_Mach1Yote]

Got the YSIB installed last night but was unable to get it fired up due to a dead battery.. I guess the original battery has finally crapped out. Put it on the trickle charger to see if i can't bring it back to life.

Anyone have any suggestions on factory location batteries? I'd like to utilize the opportunity to go to a smaller sized battery to save weight but would rather not compromise on cca or amp output. Also, keep in mind that eventually. I will be doing a relocation.

Great thread cant wait to start my build thread as well after reading though yours. As for the battery Antigravity Lithium and Dakota.

 

[NO1CARES]

I did the anti gravity atx20, in the factory location. I bought the suggested tender, have had no issues. I think it weighs 5 pounds.

how long have you had it??

Sponsored