Procharger Stage 2 Install

[Nemesys]

So im on WOT tuning now, and when I hit 6k the power just SHUTS OFF and it stops boosting. Makes me think the hose is collapsing. Ill update once I know more.l

Sponsored

 

[Barrel]

Sounds familiar...

 

[Nemesys]

Yup, shows it go extremely rich.. like a pipe blow off pre-MaF. Or something happens with the bypass. Throttle is open and load dives indicating boost drops.

from my tuner. So its either a bypass issue or the inlet is collapsing at 6k rpms. I cant get this bitch on a dyno anytime soon though. Pulls great and everything before 6k, its like I hit a wall at 6k and boost drops.

 

[Process]

Sam at Coastal gave me this wonderful idea.

http://www.carid.com/airaid/3-5-air...100-359.html?gclid=CIf5_qS1ycYCFUQSHwod3HEAQQ

Create a new inlet from this.

 

[Nemesys]

Sam at Coastal gave me this wonderful idea.

http://www.carid.com/airaid/3-5-air...100-359.html?gclid=CIf5_qS1ycYCFUQSHwod3HEAQQ

Create a new inlet from this.

but will that clear the procharger race valve? hell the inlet tube is half collapsed already with the race valve lolol

 

[SHFTN6]

from my tuner. So its either a bypass issue or the inlet is collapsing at 6k rpms. I cant get this bitch on a dyno anytime soon though. Pulls great and everything before 6k, its like I hit a wall at 6k and boost drops.

Try putting a gopro under the hood.

 

[Process]

but will that clear the procharger race valve? hell the inlet tube is half collapsed already with the race valve lolol

It does, he runs that as well. It just replaces the silicone with plastic.

 

[Nemesys]

GUYS, stay tuned, this inlet hose is fucked.

 

[Nemesys]

Here is the issue clear as day. This is the stock inlet hose that comes with the kit.

[ame]

 

[Process]

GUYS, stay tuned, this inlet hose is fucked.

Remove it, then drive around.

 

[Barrel]

Call ProCharger if you haven't already and talk to their tech line. Hopefully they'll redesign the inlet hose for people that buy the kit in the future.

 

[Nemesys]

On phone with them right now. Will it affect the PCV system, etc if I disconnect it?

 

[5.0 Steve]

That's sucks too much!:eyebulge:

 

[Process]

On phone with them right now. Will it affect the PCV system, etc if I disconnect it?

Leave the vac house that connects to the inlet open.

I'm actually disconnecting all of my pcv stuff for breathers.

 

[gqneon]

I ordered a new hose that's 3.75" at the top of the 90 degree bend to properly fit the sc inlet and 3.5" at the other end to fit the stock filter and PCV tee in pipe. Will see how that goes. It's an ebay piece so it may just be junk. I'll let you know.

Tapatalk spelling errors inside!

Sponsored