procharger ho p1

[jared89]

I have the ho with a p1 with 52lbs injectors I am running the 3.85" pulley making 8lbs with a custom tune. I think i need more boost, well want anyway. I have the 3.6" pulley at my house which should be 10lbs. Does anyone know if i would need bigger injectors or a bap. I also think about just running 12lbs, but not sure if that is too risky? I drive my car hard and race a decent amount. Any advice

Sponsored

 

[sonic]

Your injectors will support that all day the boost a pump is good insurance

 

[Chargedguard5.0]

I'm running the 3.4 pulley and I'm just over 10lbs. I do have bigger injectors and a boost a pump.

 

[whatsup62]

I have the ho with a p1 with 52lbs injectors I am running the 3.85" pulley making 8lbs with a custom tune. I think i need more boost, well want anyway. I have the 3.6" pulley at my house which should be 10lbs. Does anyone know if i would need bigger injectors or a bap. I also think about just running 12lbs, but not sure if that is too risky? I drive my car hard and race a decent amount. Any advice

Same exact setup I'm installing. Any numbers with your set-up?

 

[jared89]

I'm running the 3.4 pulley and I'm just over 10lbs. I do have bigger injectors and a boost a pump.

what do you id1000?

Your injectors will support that all day the boost a pump is good insurance

Thanks i thought they should be ok

Same exact setup I'm installing. Any numbers with your set-up?

564hp 466tq

 

[15GTPP]

I have the same exact setup as you and also want to pulley down to a 3.6 but I was told by Lund that I would need bigger injectors and a bap for safety. Then I was told by Procharger the 52lb injectors are good till about 625whp. I put down 550/440 before the catless headers.

 

[Chargedguard5.0]

I have the same exact setup as you and also want to pulley down to a 3.6 but I was told by Lund that I would need bigger injectors and a bap for safety. Then I was told by Procharger the 52lb injectors are good till about 625whp. I put down 550/440 before the catless headers.

My car put down 623rwhp with the 3.4 pulley and 93. I think the 3.6 pulley puts u right on the edge of needing bigger injectors.

 

[whatsup62]

Good info. I have 58lb Bosch injectors that come with the Whipple kit and a JMS BAP. I plan on Lund tuning it. Im guessing i should be good 3.85 - 3.4 pulley (8 -12psi)?

Sponsored