Oil & Filter Change (Video)

[Enoch]

Bit long winded, but might be of use

[ame]

Sponsored

 

[Manders Mustang]

The UK version of Bill strikes again!!!!

 

[Gibbo205]

Wheels looking much better in the video!

Great view of the oil cooler whilst oil is draining for those who were wondering exactly where it is on our cars, that is the part that has failed on my car.

Just to add when I do my oil changes, I wear gloves to prevent burning and can then just catch the sump plug.
Also to note once finished draining I always pour 0.5-1l of fresh new oil through the engine to make sure all the old oil is flushed through as best possible.

 

[christianUK]

Andy - have you got the torque figures to hand for this?
For both the filter (if torqued) and the sump plug
Also I meant to ask you where you got your spare sump plugs from.

Cheers

 

[NornIron91]

Andy - have you got the torque figures to hand for this?
For both the filter (if torqued) and the sump plug
Also I meant to ask you where you got your spare sump plugs from.

Cheers

You can get the sump plug here - http://www.fordpartsuk.com/shop/for...n_plug_from_2015_onwards_f_4948795_c_1632.htm

 

[Enoch]

Sump plug is 19ft/lbs or 26Nm
Filter is 5Nm and then 180 degrees..

I haven't got a wrench that goes that low, and even if I did, I'm not convinced it'd fit in the space required, so I just go hand tight...

Sump plugs I got with a load of other stuff from the US

Part No is below

Sponsored