Official RTR Tech 7 Install Thread!

[2morrow]

Yeah, that happened to me as well. I am trying to figure out a better option for my next set of wheels. Even considered driving down to LA to pick em up.

Sponsored

 

[Kong76]

So what was the final consensus on the 20x10.5 wheel with a 305/35? Will it in fact rub? 45 offset seems normal for that setup. Looking at getting a staggered set here in a bit.

 

[HrDrift]

just installed 1 side already, couldn't wait for my replacements. Plus i have a daily for a week so it will just stay in the garage until i get my replacements back. Here are some quick pictures

 

[Ryan_waggle]

just installed 1 side already, couldn't wait for my replacements. Plus i have a daily for a week so it will just stay in the garage until i get my replacements back. Here are some quick pictures

Those are staggered 20s? What size tire you running out back?

 

[2morrow]

[MENTION=15930]HrDrift[/MENTION], looks really good! Making me have second thoughts about getting a set of these.

Does anyone know if the 10.5" wide will clear the PP brembos or will i need the 8mm spacer still?

 

[Cobrakev]

Installed my 20" wheels yesterday. 9.5" 275/35/20 MPSS in front. 10.5" 285/35/20 in back. My thoughts on this setup. Fronts are perfect in size and looks. The backs stick out about 1/2" pass the fender. Not that big of a deal, but if you are trying to stay inside the fender, a 275 is about MAX. I think a 305/35 will fit, but like I said will stick out. I have a 1" drop on Steeda Progressive springs. I think it would also be possible to run a 285/40 but it would be very close to rubbing.

 

[Kong76]

Bummer that the 10.5 +45 can't handle a 305 without sticking past the fender. I know Velgens can.

 

[HrDrift]

[MENTION=19793]2morrow[/MENTION] THANKS!


[MENTION=12934]Ryan_waggle[/MENTION] all 20 x 9.5 with 275/35/20 square set up

 

[Black]

I've got charcoal 20" on a magnetic. Stock lugs worked fine. Only problem I had was my impact socket was too fat to fit without scuffing the wheel

Pictures please

 

[Cascadia_302]

just installed 1 side already, couldn't wait for my replacements. Plus i have a daily for a week so it will just stay in the garage until i get my replacements back. Here are some quick pictures

Great call on the finish choice, contrasts well with the Shadow.:cheers:

 

[Cobrakev]

Bummer that the 10.5 +45 can't handle a 305 without sticking past the fender. I know Velgens can.

How is that possible? 10.5 wheel with +45 is the same wheel. I can not see it fitting

 

[Ryan_waggle]

Looks great.

I'm considering the staggered 20s in the gloss black. I was thinking 265/35/20s up front. 305/35/20s in the back. Cars sitting on eibach pro kits. can't seem to get a solid answer on whether clearance will be an issue or not. Help anyone!

 

[Kong76]

How is that possible? 10.5 wheel with +45 is the same wheel. I can not see it fitting

I have seen countless wheels 10.5 with 45 offset with 305s that sit flush with the fender. Velgen recommended 295/35 but I found several with 305s. No issues. I just dont understand how these wheels 20x10.5 with a 305/35 will stick out an inch in the rear. This was coming from AM online chat.
Another member here posted his 19x10.5 with 305s and it looks perfectly fine, no poke.

 

[Cobrakev]

Yeah I have the 20x10.5 with the 285/35 and it sticks out 1/4" passed the fender. Hell without the tire the wheel looks like it sticks out a bit.

 

[Kong76]

Gotta have that 305 rear so these wheels are a no go.

Sponsored