Sponsored

Search results

  1. 3-4k rpm fast rattle under load with video

    No, I haven't gotten the chance to take it in but i did find on a F150 forum someone with an almost identical issue and the ended up replacing their maf sensor and that helped. Might try that first. I dont see how it could be injectors because it doesnt happen at idle revving nor a slow rev...
  2. 3-4k rpm fast rattle under load with video

    So i tried the shifter and mine doesn't rattle like yours Lonnie. I will be taking it to a shop shortly to trouble shoot.
  3. 3-4k rpm fast rattle under load with video

    Man that does kinda sound like what i have as well... crazy find. Im going to try it on the way home tonight and see what happpens. I have no clue what that could be. Its a linkage i know that.
  4. 3-4k rpm fast rattle under load with video

    Yea i have the bbq tick but it goes away with ceratec been doing that after oil changes for years. I can reproduce that at idle with slight throttle.
  5. 3-4k rpm fast rattle under load with video

    I just had the car checked for exhaust leaks and mentioned the flex joint and they said it was good. I do have a leak but he said he doubts thats where the rattle is coming from. Im hoping its not the timing chain tensioner. Seems to happen at peak torque 3.5 to 4k. I took a rubber mallet...
  6. 3-4k rpm fast rattle under load with video

    This is good to know its not detonation or pinging, im sure your tuner looked for that. I was curious about that as well. But i had the Ford Performancr power pack 2 kit years back and took it off due to detonation. Sounds different than that.
  7. 3-4k rpm fast rattle under load with video

    I also took off the sound tube but mines plugged. I wonder if it could be the clutch springs rattling? I was under car and checked everything. Couple missing plastic shield guard fastners but no luck.
  8. 3-4k rpm fast rattle under load with video

    I have a 16.. mine seems to be coming from outside driver side engine area i think. I taped my phone under the hood to get audio but its hard to tell
  9. 3-4k rpm fast rattle under load with video

    Here is a better video.. Its on the second rpm rev.
  10. 3-4k rpm fast rattle under load with video

    I just added a bottle of redline s1-1 fuel system cleaner so maybe that will help. If not prob time to replace the injectors. Thank you for your help. Im hoping its not serious.
  11. 3-4k rpm fast rattle under load with video

    Figured I would come here first. 3-4k rpm only and under medium to heavy throttle under load. Does not do it stationary and reving nor does it do it on a slow rev up to 4k while driving. Only when i get into it. My gut is telling me tensioners that i already had replaced at 19k miles. Car...
  12. Second Front Main Seal in 65k miles

    Yea its the dealer. I would hope so but with todays world who knows. They replaced the seal at 17k and i might be in the same boat again.
  13. Second Front Main Seal in 65k miles

    Im going to show the tech this.
  14. Second Front Main Seal in 65k miles

    Popped the hood to check and its starting to weep again from the inside of the harmonic balancer by the bolt out. Slow weep. Wondering if I should use this as an excuse to get away from the mt82 and buy the 24' 10spd. They are offering 1.9% for 36 months. Like having no car payment though.
  15. Second Front Main Seal in 65k miles

    Thank you very much for that detailed response. Thats a tremendous amount of knowledge. I will mention this if and when this one gets repaired. So far they said its a seep and added dye to the oil to determine where exactly. Again thank you
  16. Second Front Main Seal in 65k miles

    Evening fellas and ladies, i have a 16 Gt with 65k miles. I had the front main seal replaced around 19k due to an oil leak around harmonic balancer. Well last week i went and got an oil change and noticed after several days the oil smell with the heater on wouldn't dissapate. Found the...
  17. WHIPPLE PREP!

    I appreciate all your help. I just looked, the quote was with one step colder plugs included not sure which ones. Prob need a thermostat as well.
  18. WHIPPLE PREP!

    Am I allowed to disclose the cost OTD for parts and install? Curious if its a decent deal.. Being quoted 20 hrs for whipple And 7 hrs for opg/cg= 27hrs
  19. WHIPPLE PREP!

    Yea from what i heard no one will send tunes to Ca for E85. That sucks on the Mach 1 kit.
  20. WHIPPLE PREP!

    Im not sure how indepth they go as far as the ECU. I just remember reading a while back about the tunes and key strokes for ignition cycles. I wouldn't put it past them to be able to. I have about 8 months and i can relocate to another state within my company. I've had enough of this...


Top