jbailer
Well-Known Member
- Thread starter
- #1
Quite a while ago, I messed around using FORScan thanks to the very informed people here and was able to turn on some very hand features. One thing I thought I did correctly was setting up the parking lights as DRLs and even enabling the option to turn them on in the dash settings. Then I thought one of my LED turn signals was bad, 1 worked the other didn't. Recently, I replaced my LED turn signals with the MP Concept turn signals and the problem persisted. The driver's side DRL worked and the passenger's side doesn't.
I went back into FORScan and changed settings I thought might fix it and at some point during my settings, the passenger's side will work and the driver's side doesn't. I just can't ever get them both working. Then I thought, I just don't want 1 working and 1 not so I returned ALL of the BCM (0726) controls back to their original factory values (I saved them before ever modifying). I also changed the IPC settings back to factory original. Still I have 1 parking light on as a DRL and the other out. Any ideas on how I can fix this? I literally did a stare and compare on every single value comparing current using FORScan and the factory original values I saved for all of the BCM and IPC. Any help GREATLY appreciated!
I went back into FORScan and changed settings I thought might fix it and at some point during my settings, the passenger's side will work and the driver's side doesn't. I just can't ever get them both working. Then I thought, I just don't want 1 working and 1 not so I returned ALL of the BCM (0726) controls back to their original factory values (I saved them before ever modifying). I also changed the IPC settings back to factory original. Still I have 1 parking light on as a DRL and the other out. Any ideas on how I can fix this? I literally did a stare and compare on every single value comparing current using FORScan and the factory original values I saved for all of the BCM and IPC. Any help GREATLY appreciated!
Sponsored