5doorsoffury
Well-Known Member
- Thread starter
- #1
So i was running rcas up the dr side i get to my driver kick panel so i know the hood pop gets taken out so i go in there with a pick and see one of the clips pushed in to the point where it cant springback. some one frigging took this thing off once and they sucked at putting it back wtf... i have been a mecp installer payin bills for 15 years before i got into telecoms so i know when someone sucks at removing panels....... i friggin got it with 21 miles and someone already fucked a clip up... so i continue and see cut harness fabric tape. not like tessa tape the kind thats like masking tape that is used to join seperate prepped harnesses together so i track it down and see cut tape everywhere...
The kick had 3 threaded holes with impressions from something that was there and now is gone. so basicly a bracket and or module was removed along with all the harnesses for it. in fact the harness that was there was shifted in a way as to prevent the panel clip from seating when reinstalling the panel....what is above the driver kick and what could it of been that they took out AFTER it was built... its a base 300a with 6 speaker audio. the only thing i can think of is the modem delete. yes i forgot to mention the vehicle is one of many with the 4g delete im sure that shit was worth more then 20 bucks but i digress.
The kick had 3 threaded holes with impressions from something that was there and now is gone. so basicly a bracket and or module was removed along with all the harnesses for it. in fact the harness that was there was shifted in a way as to prevent the panel clip from seating when reinstalling the panel....what is above the driver kick and what could it of been that they took out AFTER it was built... its a base 300a with 6 speaker audio. the only thing i can think of is the modem delete. yes i forgot to mention the vehicle is one of many with the 4g delete im sure that shit was worth more then 20 bucks but i digress.
Sponsored
