Matte metallic grey paint code

[2022 Mach 1]

Like the subject says, anyone know where to get a touch up or the paint code for the matte metallic Grey used on our Mach 1s?

TIA

Sponsored

 

[2022 Mach 1]

Bump this up

 

[Coastal-Mach]

I have touch up paint for the wheel color, unfortunately it will be a while before I can give you the code, we are on a cruise ship.

 

[WV millwright]

Is the paint code not on the door jam sticker?

 

[KeyLime]

Maybe this will help.

https://paintref.com/cgi-bin/colorc...smodel=Mustang&sname=Fighter Jet Gray&rows=50

 

[2022 Mach 1]

Is the paint code not on the door jam sticker?

Yes for the EG. Mach 1s have 3 different paints used. Only the body color is shared.

 

[WV millwright]

I understand. I wasn't even thinking of that. Ford only lists the primary body color, not the trim and secondary ones.

Well in that case, I'm no help.
Hope you have a wonderful New Year and enjoy the little pony however you see fit.

 

[2022 Mach 1]

I understand. I wasn't even thinking of that. Ford only lists the primary body color, not the trim and secondary ones.

Well in that case, I'm no help.
Hope you have a wonderful New Year and enjoy the little pony however you see fit.

You too. Have fun, be safe

 

[MAGS1]

Found this thread. Last post

https://www.mustang6g.com/forums/th...o-paint-mach-1-hp-spoiler.181529/post-3660791

 

[2022 Mach 1]

I tried j7 and it has way too much of a gloss finish to it. It rockers splitter mirrors an spoiler have a much more matte finish.

I am attempting to fix a scratch on my rocker panel. Ford parts counter was no help

 

[MAGS1]

I tried j7 and it has way too much of a gloss finish to it. It rockers splitter mirrors an spoiler have a much more matte finish.

I am attempting to fix a scratch on my rocker panel. Ford parts counter was no help

The matte/satin finish should be the clear coat, not the paint itself. If you have a test panel or something to mess around on, apply the J7 (no clear coat) and get a piece of matte/satin PPF and put it over top. Assuming the actual color is correct, with the matte PPF it should look really close to the rocker/mirrors/spoiler. A matte/satin clear coat will look better than the PPF but will at least give you an idea if it’s right or not.

 

[2022 Mach 1]

The matte/satin finish should be the clear coat, not the paint itself. If you have a test panel or something to mess around on, apply the J7 (no clear coat) and get a piece of matte/satin PPF and put it over top. Assuming the actual color is correct, with the matte PPF it should look really close to the rocker/mirrors/spoiler. A matte/satin clear coat will look better than the PPF but will at least give you an idea if it’s right or not.

So the touch up j7 pen comes with the clear coat so I probably need a matte clear instead of what's provided. The j7 on its own is very glossy. Luckily I have an old splitter I'm testing on.

 

[MAGS1]

So the touch up j7 pen comes with the clear coat so I probably need a matte clear instead of what's provided. The j7 on its own is very glossy. Luckily I have an old splitter I'm testing on.

Sorry should’ve explained a little better. So the application and finishing of the clearcoat is what gives it the matte/satin finish. A shop would have to do it, unless you know how to do it (or know someone that can do it).

 

[Ghost04]

Have you seen this thread?

https://www.mustang6g.com/forums/threads/base-mach-1-hp-gt500-spoiler-fitment.157156/

 

[2022 Mach 1]

Have you seen this thread?

https://www.mustang6g.com/forums/threads/base-mach-1-hp-gt500-spoiler-fitment.157156/

Looks like I'm going to have to have some custom paint mixed.

Sponsored