Width is 9.5" and 10". Cannt answer the backspace or offset.Does anyone have the p/n and/or specs (width and backspacing) on the "stock" 5-spoke Mach 1 wheels? I've got an HP car on order, but was thinking about grabbing a set of them to use as winter wheels, I'm really digging the look.
9.5 inch rim, 255/40 ZR 19 MPS4 front. 10 inch rim 275/40 ZR 19 MPS4 rear. same tire size as GT but wider rims. = "improved stability and larger contact area." spins out a very small amount in the cold & wet but much better than the Perelli's that I had on my 2016.Does anyone have the p/n and/or specs (width and backspacing) on the "stock" 5-spoke Mach 1 wheels? I've got an HP car on order, but was thinking about grabbing a set of them to use as winter wheels, I'm really digging the look.
Fronts weigh about 33 lbs and rears 35 lbs, but that's with wheel weights installed so actually a little less than that.
Fronts are 19 x 9.5 +40, and rears are 19 x 10 +52.5.
For what it’s worth, I got the OEM take offs for $825. Total cost was about $1,400 for the wheels, TPMS, mount & balance, and a set of used 255/40 and 275/40 all seasons with 9/32 tread.Just pick a set of LMR wheels in a 19x10 square setup, they will be cheaper than a set of OEM take offs. Then get some 275/40 or 285/35 winter tires or all seasons.
they look really good in person.Does anyone have the p/n and/or specs (width and backspacing) on the "stock" 5-spoke Mach 1 wheels? I've got an HP car on order, but was thinking about grabbing a set of them to use as winter wheels, I'm really digging the look.
Mustang Mach 1Does anyone have the p/n and/or specs (width and backspacing) on the "stock" 5-spoke Mach 1 wheels? I've got an HP car on order, but was thinking about grabbing a set of them to use as winter wheels, I'm really digging the look.
Here's what it looks like... I did exactly what you're thinking:Does anyone have the p/n and/or specs (width and backspacing) on the "stock" 5-spoke Mach 1 wheels? I've got an HP car on order, but was thinking about grabbing a set of them to use as winter wheels, I'm really digging the look.
I am thinking of buying a set of these to replace my OEM PP1 wheels. I’m an old guy and not in to tracking my car, just want for aesthetic reasons.Here's what it looks like... I did exactly what you're thinking:
Spend an extra $60 on a new hoodie while you're at it LOL...I am thinking of buying a set of these to replace my OEM PP1 wheels. I’m an old guy and not in to tracking my car, just want for aesthetic reasons.
Not surprising. The HP wheels are more GT350 whereas the M1 Standard wheel clearly says M1.Does anyone have the p/n and/or specs (width and backspacing) on the "stock" 5-spoke Mach 1 wheels? I've got an HP car on order, but was thinking about grabbing a set of them to use as winter wheels, I'm really digging the look.