Lugnuts torque 150

[tittermary]

That's got to be a miss print no way hell am I going to tq them that tight

Sponsored

 

[mbreinin]

I torqued them to what my big ass electric put on them.

 

[boardkat]

that's the difference in torque needed between an M14 and 1/2 stud (which has been the standard on mustangs for years). don't do 100; they'll back off. ask me how i know ;)

 

[tittermary]

Lol gotcha

 

[tittermary]

i did same as you mike, bout 130lbs, not going to tighten up to the point my electric impact wont take them off i still say its excessive on another note the 315's look bad ass on there, gription hehe

 

[JohnDoe]

that's the difference in torque needed between an M14 and 1/2 stud (which has been the standard on mustangs for years). don't do 100; they'll back off. ask me how i know ;)

Now you definitely have to tell us the story!

 

[H1 GT]

I surely wouldn't trust an electric impact. I have an electric impact that says its good to 330ft/lbs but no way.

You can always break more torque with an 18" breaker bar than such an impact gun.

I always torque to 150, if something bad happens I'll share my concerns with Ford.

Sponsored