LPF Kit Install Instructions?

[tdstuart]

Picked up a used lpf turbo kit. Does anyone have the install instructions? I know a few members on here picked up the kit several years ago but none seem to be active anymore. For those that don't know lpf went out of buissness so I don't think I can contact them to get it.

Thanks!

Sponsored

 

[tdstuart]

Bump

 

[Timbuck]

Nice find. what kit is it. ? Pics ? Is it the bottom twin turbo kit ?

 

[cbrtrx]

I think you're going to have to wing it. Shouldn't be too bad once you start laying everything out.

 

[NGOT8R]

I’m going to be in the same boat as you with my BL Fab kit. I didn’t receive any instructions with it. I’ll have to rely on mockup photos found on the internet.

Good luck with your install and please post pics as things progress.

 

[NGOT8R]

What year is your GT? Any forethought on how/where you’re going to install your turbo oil drain fitting?

 

[tdstuart]

What year is your GT? Any forethought on how/where you’re going to install your turbo oil drain fitting?

2015 gt but will have a built gen3 shortblock with gen 2 heads.

The turbos are comp 62/62(I think) oilless water cooled turbos. So no oil lines for me just have to make my own coolant lines.

 

[tdstuart]

Nice find. what kit is it. ? Pics ? Is it the bottom twin turbo kit ?

Yes it’s their bottom mount kit! Here is some photos of it in some boxes

 

[NGOT8R]

2015 gt but will have a built gen3 shortblock with gen 2 heads.

The turbos are comp 62/62(I think) oilless water cooled turbos. So no oil lines for me just have to make my own coolant lines.

Copy that. Have you seen the FatHouse Fab coolant distribution block? They should make your coolant routing go much more smoothly. I bought one for mine to cool my wastegates which have coolant ports on them. See pics.

 

[tdstuart]

Copy that. Have you seen the FatHouse Fab coolant distribution block? They should make your coolant routing go much more smoothly. I bought one for mine to cool my wastegates which have coolant ports on them. See pics.

That looks really good will have to check that out!

 

[NGOT8R]

That looks really good will have to check that out!

They’re only $100.

Note: If you look at mine you’ll see three black sharpie marks next to empty ports. The threads need to be chased in those. My buddy also bought one and the threads in those same three ports had to be chased. It’s an easy fix, but just wanted you to be aware that this may be a possibility if you buy one. FatHouse was notified of this too. I haven’t chased mine yet, but my buddy has and he’s already installed his. Here’s a pic of the tap that he used.

 

[tdstuart]

They’re only $100.

Note: If you look at mine you’ll see three black sharpie marks next to empty ports. The threads need to be chased in those. My buddy also bought one and the threads in those same three ports had to be chased. It’s an easy fix, but just wanted you to be aware that this may be a possibility if you buy one. FatHouse was notified of this too. I haven’t chased mine yet, but my buddy has and he’s already installed his. Here’s a pic of the tap that he used.

Did you use special lines for the coolant lines since they go so close to the exhaust and turbo?

 

[NGOT8R]

Did you use special lines for the coolant lines since they go so close to the exhaust and turbo?

I haven’t begun my install yet. I will use silicone or coolant rates hoses with heat sleeves on mine though. That first pic was a screen grab from FatHouse’s website.

 

[NGOT8R]

His name is Ramzi Carter and he’s on FB under that name. He also has a 2019 Bullitt and Comp oilless low mount turbos like yours. I’m sure he’d be more than willing to share info. with you on how he plumbed his up.

 

[tdstuart]

I’m going to be in the same boat as you with my BL Fab kit. I didn’t receive any instructions with it. I’ll have to rely on mockup photos found on the internet.

Good luck with your install and please post pics as things progress.

Are you doing BL fab single turbo kit? And did you buy it used or on sale?

Sponsored