Lighting Mods..?

[DarkHorse850]

Looks pretty good..!

Sponsored

 

[RobHunt]

Make a rear led reflector replacement that mimics the rear brake/turn signals. Would be an awesome add on.

Sent from my Nexus 5 using Tapatalk

 

[Firepath]

We've already designed something special for the 2015 Mustang headlights. It will be at SEMA this year

Nick C.

So are you guys going to be making stuff for the S550 international market? I imagine you will have a big market for red (or at least red + amber) lense tail-lights that flash red and amber.

 

[DarkHorse850]

Would anyone happen to know what the kelvin temp is on the headlights..?

 

[Bryman]

I'd be interested in seeing yellow LEDs in the fogs.

 

[DarkHorse850]

I haven't been able to find anything concrete but just wanted to know if the gill led's are drl's and on all the time? And do they "blink" when the turn signal is turned on? Still wondering about the stock hid headlight kelvin rating. And, does anyone have a picture of their led fog lights turned on (can they be turned on without turning on the headlights)?

 

[DarkHorse850]

Bump

 

[Obie]

I haven't been able to find anything concrete but just wanted to know if the gill led's are drl's and on all the time? And do they "blink" when the turn signal is turned on? Still wondering about the stock hid headlight kelvin rating. And, does anyone have a picture of their led fog lights turned on (can they be turned on without turning on the headlights)?

The gills are always on, yes. They dont turn off when the signal is activated, but, the foglight on the right or left does (since the signal is directly above the foglight and not in the headlight cluster), depending on the direction youre turning.

Im not sure of the K rating for the xenons, but I was surprised to find out the other night theyre bi-xenon lights, and they apparently auto level, though Ive yet to witness it. And yes, the foglight can be turned on with just the parking lights.

 

[DarkHorse850]

Thanks..! The headlights in my Camaro are bi-xenon so I somewhat expected that.

 

[Suddueth13]

4300K for the OEM xenons. I'm sure Ford is probably still using D3S for the capsules. Every Mustang that has been produced with xenons have been bixenon so definitely no surprise(and it's pretty obvious seeing as there is no separate high beam reflector in the headlamp assembly).

 

[Diode Dynamics]

We recently posted our RGB DRL setup that was installed by The Lighting Firm for SEMA

It's on our facebook page: https://www.facebook.com/DiodeDynamics and instagram: @diodedynamics.com

We are putting the boards into production here in the United States, and will be retailing them for $60-$80

Nick C.

 

[Patrick S]

Diode - i just sent my wife your web site. I LOVE the effects from the Grille on the orange/black car. that looks very sweet with the tri bar/halo headlight set up!

 

[DarkHorse850]

We recently posted our RGB DRL setup that was installed by The Lighting Firm for SEMA

It's on our facebook page: https://www.facebook.com/DiodeDynamics and instagram: @diodedynamics.com

We are putting the boards into production here in the United States, and will be retailing them for $60-$80

Nick C.

Those are awesome..!

 

[5.0-PoPo]

We recently posted our RGB DRL setup that was installed by The Lighting Firm for SEMA

It's on our facebook page: https://www.facebook.com/DiodeDynamics and instagram: @diodedynamics.com

We are putting the boards into production here in the United States, and will be retailing them for $60-$80

Nick C.

Can you give the details on installation or is it a complete housing kit?

Also are you guys working on a back-up light led upgrade?

 

[Diode Dynamics]

Can you give the details on installation or is it a complete housing kit?

Also are you guys working on a back-up light led upgrade?

The reverse light uses 1-3157 sized bulb, which we do offer on our site. The map lights use the same size (and housing) as the 2005-2014 Mustangs. A listing for the 2015 Mustang will be added to our site soon!

The RGB DRL LED's seen in that video will require the OEM housing to be opened up, but the boards fit in place of the factory ones.

It's unlikely that we will offer a complete housing, but we have very talented dealers who can install them for you.

We will be posting more information as it becomes available, but feel free to call us if you have any questions: (314) 205-3033

Nick C.

Sponsored