LED Lights

[Varekai]

I also like it without the resistor, reminds me of a galloping horse.

Sponsored

 

[FireHive]

Same here too.

Same same

 

[Laztug]

Just the bulb. Used the tool DD sent with my bulbs( little flat head screwdriver) and put it at the stem of the bulb and worked it out. Hard part was getting the new one in.

My kit did not come with a little tool.
I tried to install my glove box led today and blew a fuse. Anyone know what number fuse it is? OEM bulb is still in there.:doh:

 

[Thompyt]

@DiodeDynamics. The two bulbs set with the switchback Bulls as part of a kit. Where was the intended location of the two little bulbs. Rear side marker, or front orange marker lights beside the switchback location?

 

[Pazuzu7]

Subscribed

 

[Diode Dynamics]

@DiodeDynamics. The two bulbs set with the switchback Bulls as part of a kit. Where was the intended location of the two little bulbs. Rear side marker, or front orange marker lights beside the switchback location?

The front turn signals use a 7444-sized bulb, the sidemarkers use a 194-sized bulb up front

The rear sidemarkers are also a 194, but you'll want a red bulb in there, otherwise the color will wash out and look pinkish

Nick C.

 

[Diode Dynamics]

Anyone know what the parts list would be to make our own harness?

If you don't want to wait for the plug and play harness, a basic 6 ohm 50 watt resistor per side should do the trick

You won't be able to find a part number for the turn signal connectors. (They aren't available, otherwise we'd have them)

Nick C.

 

[ronnies_mustang_5o]

The front turn signals use a 7444-sized bulb, the sidemarkers use a 194-sized bulb up front

The rear sidemarkers are also a 194, but you'll want a red bulb in there, otherwise the color will wash out and look pinkish

Nick C.

Nick, any idea how to replace those rear sidemarkers? I ordered mine from you guys, and this morning when I tried pulling the stock lights, all I pulled was the plug for the wires.

Do I need to pull the side marker lens out from the outside of the car?

*EDIT* Just found the answer to my own question..."Stick your head under, shine a light and you will see the wire harness with the socket/bulb going in the housing on a angle. Unplug the harness and then twist the socket counterclockwise."

 

[neozeric]

are the new switchbacks available yet ?

 

[Diode Dynamics]

Nick, any idea how to replace those rear sidemarkers? I ordered mine from you guys, and this morning when I tried pulling the stock lights, all I pulled was the plug for the wires.

Do I need to pull the side marker lens out from the outside of the car?

*EDIT* Just found the answer to my own question..."Stick your head under, shine a light and you will see the wire harness with the socket/bulb going in the housing on a angle. Unplug the harness and then twist the socket counterclockwise."

That's one way to do it, or you can just pop out the whole-assembly from one side and disconnect the reflector. It's a fairly simple procedure, shouldn't take more than a minute or two per side

Nick C.

 

[Diode Dynamics]

are the new switchbacks available yet ?

They returned to inventory, but sold out within the first week. We put together a video explaining the updates to the switchbacks

[ame]

They will be available again in March

Nick C.

 

[Jeepwx03]

Any updates when the harness will be available?

 

[Diode Dynamics]

Any updates when the harness will be available?

They are still in development

We will post updates when they are available on the site

Thanks,
Nick C.

 

[Bryman]

They returned to inventory, but sold out within the first week. We put together a video explaining the updates to the switchbacks



They will be available again in March

Nick C.

Now that's a stand-up company. I'll be watching for them to come back in stock.

 

[Barrel]

So what do I need to do to exchange my 7443 switchbacks for ones that fit?

Sponsored