Interest in Sensor Based flex fuel install guide / write up?

[sms2022]

Trying to gauge interest in such a write up so I can decide how much effort I’m going to put into this. I can do a guide if enough people are interested with all part numbers, pics, and instructions to wire up and plumb the kit for both 18-19 and the 20-23 models with the updated dlc gateway.

if you’re interested hit this with a like. If it’s only a couple people I’ll drop part numbers for you but I can’t spend a couple hours taking pics and doing a full write up.

Guide is up: https://www.mustang6g.com/forums/th...-fuel-sensor-and-wiring-install-guide.200495/

Sponsored

 

[sms2022]

Guide will be done this weekend.

hopefully it makes it a little easier to do so we get more people doing it and more ideas on how to set it up better/more ideas for features in the PCmtec system.

 

[Rolls]

Trying to gauge interest in such a write up so I can decide how much effort I’m going to put into this. I can do a guide if enough people are interested with all part numbers, pics, and instructions to wire up and plumb the kit for both 18-19 and the 20-23 models with the updated dlc gateway.

if you’re interested hit this with a like. If it’s only a couple people I’ll drop part numbers for you but I can’t spend a couple hours taking pics and doing a full write up.

We have a full guide with pictures. Contact https://support.pcmtec.com for the guide. Alternatively, its available via the help menu if you've already purchased the software.

We provide several reference designs and a full bill of materials (BOM).

If someone offers an off the shelf in stock kit then we would be VERY interested in promoting this. It also doesn't have to be a Zeitronix ECA-2, it could be a custom CAN device that outputs the required packets which would substantially decrease the cost of the kit.

 

[sms2022]

Guide is almost done. Probably will be done tonight if I find time to write.
Rolls, don’t worry it doesn’t step on the toes of your guide. Your guide is very good but I changed a lot of stuff up and have different mounting locations/wiring routes for a left hand drive car. It also goes into detail on setting up a 2020+ car with the updated DLC using a T harness and not chopping the factory harness

 

[Rolls]

Guide is almost done. Probably will be done tonight if I find time to write.
Rolls, don’t worry it doesn’t step on the toes of your guide. Your guide is very good but I changed a lot of stuff up and have different mounting locations/wiring routes for a left hand drive car. It also goes into detail on setting up a 2020+ car with the updated DLC using a T harness and not chopping the factory harness

The more the merrier!

There are so many combinations that we would love to see more guides out there to suit different vehicle combinations. Just make sure you put a disclaimer (for your own legal protection) and that it is produced by a third party not PCMTEC.

Legend!

People are welcomed to make and sell their own kits as we won't be moving into the hardware market (due to logistics).

Could you post your guide here if possible so others can see it ? We could even include it in our official documentation if its proven and compensate you for your time if you want.

Mustang/F150/Explorer CANBus Flex Fuel Installation Guide - Mustang HOWTO Guides - PCMTEC Forums

Regarding branding, logos, stickers etc, contact us and we can brand it/advertise it if anyone wants to sell something commercially.

 

[sms2022]

guide is done. See this thread:

https://www.mustang6g.com/forums/th...-fuel-sensor-and-wiring-install-guide.200495/

Sponsored